TK4911F Master Front Wheel Bearing, Seal, Tools Kit 1959-1969.5 Ford

TK4911F Torque King® Premium Master Front Wheel Bearing and Seal Kit with Tools for 1959-1969.5 Ford Dana 30, Dana 44 Front Axles fits 1959 to 1969.5 Ford F-100 and F-250 4x4 trucks with standard Dana 44 front axles. Also fits 1966-1969.5 Bronco with the Dana 30. Do the job right the first time with premium quality parts custom made for the job! Includes 4 Timken® Bearings with Bearing Cups, 2 Wheel Seals, Bearing Cup Installers, Wheel Seal Installer, and Driver Handle.

Don't Need the Tools? See: TK4912F Bearing and Seals Only Kit

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Kit Components
Works on Open and Closed Knuckle Axles
Fits
1969 Seal/Hub Design Change
Matching Parts
Applications

Tech Note 1: Kit Components
TK4911F Master Kit with Tools includes:
2 QU50447 Timken® Outer Wheel Bearing Cups
2 QU50448 Timken® Outer Wheel Bearings
2 QU50577 Timken® Inner Wheel Bearing Cups
2 QU50578 Timken® Inner Wheel Bearings
2 QU50654 Wheel Seals
QT1802 Outer Wheel Bearing Cup Installer
QT1803 Inner Wheel Bearing Cup Installer
QT1504 Front Wheel Seal Installer
QT1100 Driver Handle

Tech Note 2: Works on Open and Closed Knuckle Axles
These Kits work on both closed knuckle axle (enclosed axle u-joint and QU42187 bolt knuckle seals) and open knuckle (exposed axle u-joint) configurations use these Kits. The axle fitments are:
1966-1969.5 Bronco Dana 30 Axle
1959-1965 F100 closed knuckle Dana 44
1966-1969.5 F100 open knuckle Dana 44
1959-1969.5 F-250 closed knuckle Dana 44

Tech Note 3: Fits
This Kit fits 1959 to 1969.5 Ford F100 and F250 4x4 trucks with the standard Dana 44 front axles plus 1966-1969.5 Broncos. These axles will all have internally splined wheel hubs.

Tech Note 4: 1969 Seal/Hub Design Change
Ford made a front seal/hub design change midway through the 1969 model year. The 1969.5 hub uses 3.3" diameter QU90001 Seal instead of 3.25" diameter QU50654 Seal. My 1964-1972 Ford Parts Book has the 1969 seal part number break point listed differently in the hub (to serial number F70000) and axle parts (to serial number F30000) sections. I believe the hub section is correct, but if your 1969 4x4 has a VIN between F30000 and F70001, you should physically verify which seal you need. The Break point is determined by the 1969 Vehicle Identification Number (VIN).
Use TK4911F/TK4912F Kits on F-Series and Bronco up to VIN F30000
VIN 30001 to F70000: Physically Identify Seal outside diameter before ordering
Use TK4711/TK4780 Kits on F-Series and Bronco from VIN F70001

Tech Note 5: Matching Parts
Matching Parts and Tools for TK4911F Front Wheel Bearing and Seal Kits:
QU20371U Used 5 Bolt Front Wheel Hub for 1960.5-1969.5 F100 and 1966-1969.5 Bronco
TKA20267 Front Spindle for 1960.5-1965 F100 and 1960.5-1975 F250
QU40045 Cap O-Ring for 1968-1979 Factory Spicer Hub
QU40044 Dial O-Ring for 1968-1979 Factory Spicer Hub
QK4727 Round, 4 Slot Spindle Nut Kit
QU90018 Protection Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease
QT5500 Wheel Bearing Packer
QT1012i or QT1025 4 Lug Spindle Nut Sockets
Ford Shop Manuals

Applications:
Ford:
Bronco Dana 30 Axle: 1966, 1967, 1968
Bronco Dana 30 Axle up to serial #F30000: 1969.5
F100 closed knuckle Dana 44: 1959, 1960, 1961, 1962, 1963, 1964, 1965
F100 open knuckle Dana 44: 1966, 1967, 1968
F100 open knuckle Dana 44 up to serial number F70000: 1969
F-250 closed knuckle Dana 44: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968
F-250 closed knuckle Dana 44 up to serial number F70000: 1969