QU10616 1990.5-1993 Dodge Dana 60 Internal Spline Mount Hub & Rotor

QU10616 1990.5-1993 Dodge Dana 60 Internal Spline Mount Hub and Rotor is a genuine original equipment hub and rotor assembly for 1990-1/2 to 1993 Dodge W-250 and W-350 4x4 Single Rear Wheel (SRW) Trucks with Dana 60 or Dana 61 front axles equipped with internally splined front wheel hubs. Includes the two bearing cups. Wheel Bolt size is 1/2". Limited Supply, available while supplies last. When sold out, see TK4206 for Replacement Hub and Rotor Kit.

Also see TK4978 Wheel Hub only
Also see QU80005 Brake Rotor only
Also see TK4206 Replacement Hub and Rotor Kit

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Originally
Matching Parts
Applications

Tech Note 1: Originally
Dodge used 2 types of front Dana 60 wheel hubs on King Pin type Dana 60 or Dana 61 front axles with each type available for single rear wheel or dual rear wheel mounting flange offsets. From 1975 until around early 1991, the wheel hub was drilled and tapped with eight 3/8" USS bolt holes for mounting an external drive flange or Selectro locking hub (wheel hub p/n QU11069AS). In 1991, these hubs were phased out in favor of a hub with internal splines for mounting a Warn plastic dial locking hub (hub and rotor p/n QU10616).

Tech Note 2: Matching Parts
QU40119 Wheel Seal
QU50412 Outer Wheel Bearing
QU50398 Inner Wheel Bearing
QU40293 Spindle
QK4729 Spindle Nut Kit
QU90018 Protection ES Synthetic Wheel Bearing Grease
QT1505 Wheel Seal Installer
QT1100 Driver Handle for Installers
QT1018 and QT1110i 4 Lug Spindle Nut Sockets

Applications:
Dodge:
1990.5, 1991, 1992, 1993 W-250, W350 with Dana 60 front axle, single rear wheels and internal spline hub with 1/2" wheel bolts