Description
QU10184 GM C-Truck 35 spline NV4500 Transmission 1350 Series Rear Output Yoke for Spicer 1350 series universal joint. These genuine New Venture original equipment yokes fit fixed rear yoke type, 1992-2007 GM 4x2 MT8 or MW3 NV4500 5 Speed Manual Transmissions in C1500, C2500 and C3500 conventional pickups without transmission mounted parking brakes. New or new takeoff yokes may have some slight surface rust on yoke casting from long storage.
Also see QU10727 1350 Series Yoke with Dampener
Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes:
Matching U-Joints
NV4500 Tools
Matching Parts
Applications
Tech Note 1: Matching U-Joints
QU10184 is made to accept universal joints made to Spicer 1350 series dimensional specifications. U-Joint cup diameter is 1-3/16". Overall width of installed universal joint is 3-5/8". Use with TK40719 or QU40731 universal joints.
Tech Note 2: NV4500 Tools
Need Exploded Views, Torque Specs or Rebuild procedures? Order my 116 page, full color illustrated TM1003 NV4500 Rebuild Manual.
You will need some special tools to correctly service your NV4500 Transmission. The chart below lists our current NV4500 Special Tools for popular models.
TOOLS for SPECIFIC NV4500 MODELS |
||||||
| Component | 23 Spline Dodge 4x4 NV4500LD |
29 Spline Dodge 4x4 NV4500HD |
30 Spline Dodge 4x2 NV4500LD |
31 Spline Dodge 4x2 NV4500HD |
32 Spline GM 4x4 |
35 Spline GM 4x2 |
| Mainshaft Nut | QT2002 | QT2001 QT2036 |
QT2002 | QT2001 QT2036 |
QT2002 QT2028 |
1-1/2" Hex Socket |
| Mainshaft Holding | NLA | QT2000 | NLA | QT2011 | N/A | N/A |
| 5th Gear Nut Torx® Cross Bolt |
N/A | QT9205 | N/A | QT9205 | N/A | N/A |
| Output Seal Installer | N/A | QT1801 | N/A | QT2058 CALL |
Not Used | Not Used |
| Tailshaft Bushing Remover and Installer | Not Used | Not Used | Not Used | QT2044 | Not Used | Not Used |
TOOLS For ALL NV4500 MODELS |
||||||
| Countershaft Front Bearing Cup Installer |
QT1802 | Use with QT1101 or QT1119 Driver Handle. Also can use flat side to install Dodge 4x4 Rear Output Seal | ||||
| Countershaft Front Bearing Installer | QT2004 | Can also use to press 3-4 Synchro Hub on original equipment mainshafts | ||||
| Input Bearing & Countershaft Rear Bearing Installer | QT2005 | Can also use to install Input Seal | ||||
| Input Bearing Cup Installer | QT1801 | Use with QT1100, QT1101, QT1116, or QT1119 Driver Handle. | ||||
| Countershaft Support | QT2006 | Use to support front of countersahft when installing countershaft rear bearing | ||||
| 1-2 Synchronizer Support | QT2008 | Use to support 1-2 synchronizer hub during synchronizer assembly | ||||
| 10mm 1/2" Drive 12 Point Socket | QT1020 | USA Made Impact Socket for Factory Tailshaft Housing Bolts | ||||
| Long Shank Punch for Shift Lug | QT9300 | 3/16" x 8" Shank for 5th Gear Shift Lug Roll Pin | ||||
Tech Note 3: Matching Parts
Matching Parts for QU10184 NV4500 Rear Output Yoke:
QU10720 4x2 NV4500 Transmission Rear Output Seal
QU30009 Internal Spline Seal
QU30095 Yoke Washer (fits between Yoke and Nut)
QU10181 Yoke Nut
QK3112 U-Joint Strap and Bolt Kit
QU10177 Mainshaft Bearing Spacer
QU10719 4x2 Transmission Mainshaft (Rear Output Shaft)
TK40719 or QU40731 Universal Joints
QU10727 Dampened 1350 Series Output Yoke
QU30094 1410 Series Output Yoke
QU10183 Dampened 1410 Series Output Yoke
Applications
Chevy and GMC:
C1500, C2500, C3500 with NV4500 5 Speed: 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999
C2500, C3500, Standard and HD Pickup based models with NV4500 5 Speed: 2000, 2001, 2002, 2003, 2004, 2005, 2006
C2500 Silverado Classic and Sierra Classic with NV4500 5 Speed: 2007
Warranty
Product Reviews
Delivery & Returns
Shipping times are estimated in your cart.
More info can be found at the link below.
