Shop now for Wheel Bearings, Wheel Seals, and Wheel Bearing/Seal Kits to fit 1975-1993 Dodge W200, W250, W300, W350 trucks with Dana 60, 61 Front Axles. Great selection. In stock. Quick shipping.
Dodge used only the best wheel bearings and seals money can buy to equip their Dana 60 and Dana 61 front axles to minimize the chance for warranty problems. That is why they chose Timken® Wheel Bearings and Spicer Wheel Seals for heavy-duty Dodge 4x4s using the big Danas. We supply those exact original equipment replacement Timken® Wheel Bearings and Spicer Wheel Seals to keep your Dodge on the job for years to come.
Dodge used the same wheel bearing and seal numbers for the entire 1975 to 1993 production run of Dana 60 and Dana 61 King Pin type front drive axles. However, spindle nut sets and lockout hubs will vary year. Wheel hubs will vary by both year and if the truck had single or dual rear wheels. For 1975 to 1989, all the trucks used QU11070 hex spindle nuts, QU40051 spindle lock washer, and externally mounted drive flanges or lockout hubs using QU50216 hub gasket. 1990 and 1991 were transition years. During 1990, the external mount type wheel hub was phased out by an internally splined wheel hub, but the hex spindle nut configuration was retained for 1990 and most of the 1991 production. You may find some later 1991s with QK4729 round spindle nut set. For 1992 and 1993, the change over was complete. All trucks would have internally splined wheel hubs and use the round, QK4729 4 slot spindle nut set.
