Tools for 2000-2002 Ram Dana 60F Axle

QT1100 1" x 8" Standard Duty Installer Driver Handle with 5/8" Tip and knurled hand grip is used with QT1500 series Seal Installers and QT1800 series Bearing Cup Installers with 5/8" center holes. QT1100 will become one of the most used tools in...

QT2005 1-5/8" Capacity Bearing Installer and NV4500 Input Seal Installer for Transmissions and Axles This is our most popular Pinion and Transmission Bearing Installer. QT2005 was originally designed to install the Input Bearings, Countershaft Rear...

TS4862 Front Axle Inner Oil Seal Remover Set for AAM 925 and Most Dana 60 Front Axles is a real time saver! Use to remove the inner axle shaft oil seals on any 4x4 solid front drive axle with axle housing tube inside diameters of 2" or larger and axle...

QT1032 USA Made Dana 25-Dana 80 Differential Case Spreader for Dana-Spicer Axles Dana Axles are designed to have a differential bearing preload of .010"-.015". With our Case Spreader, removing and installing front and rear differentials on your 4x4 is...

QK4803 Inner Axle Seal Kit for Right Side Only for 2000-2002.5 Dodge Ram 2500 and 3500 Front Axles equipped the vacuum controlled Central Axle Disconnect (CAD) system. Installs QU40271 original equipment seals. These large diameter seals are not...

QT1812 Outer Pinion Bearing Cup Installer is used to install many of the Bearing Cups used in Chevy, Dodge, Ford, GMC, and Jeep SUV's, 1/2, 3/4 and 1 ton trucks from 1942 to current. QT1812 fits our QU50400 (Dana Axle Outer Pinion), QU50539 (Inner or...

QT1070 Adjustable Depth Right or CAD Side Inner Axle Shaft Seal Installer for all 2000-2002.5 Dodge Ram 2500 and Ram 3500 trucks with vacuum controlled Central Axle Disconnect (CAD) Dana 60 front axles to install QU40271 original equipment CR made...

TS4621 Left and Right Side Inner Axle Seal Tool Set for 2000-2002 Dodge Ram 2500 and Ram 3500 with Dana 60 front axles and Central Axle Disconnect (CAD) system. Installs QU40271 and QU40298 original equipment seals. These large diameter seals...

QT9404 Application Brush is ideal for applying Gear Marking Compound or Anti-Seize Lubricant to parts. Brush fibers and steel handle are resistant to most automotive chemicals. USA made. Need More Info? Use the handy Links below to access over 40 years...

QT1088 Press Step Plate for Differentials for Dana 60, Dana 70, Dana 70HD, Dana 80, Ford 10.25", Ford 10.5", GM 14 bolt axles is used when pulling and/or installing your differential bearings. These plates fit in the axle shaft hole of your...

QT1158 Differential Bearing Installer for all 2003-current AAM 10.5" Dodge Ram 2500 rear axles, all 1973-current AAM/GM 14 bolt, 10.5" ring gear rear axles, all Dana-Spicer Model 60 and 61 front or rear axles, plus all standard Model 70 axles that use...

QT1216 2-1/4" Front Axle Shaft Oil Seal Remover is used in conjunction with our TS4863 Handle Set to remove the front inner axle shaft oil seals from many late model 4x4 trucks with solid front drive axles. QT1216 measures a bit under 2-1/4"...