TS4862 Inner Axle Remover Set

TS4862 Front Axle Inner Oil Seal Remover Set for AAM 925 and Most Dana 60 Front Axles is a real time saver! Use to remove the inner axle shaft oil seals on any 4x4 solid front drive axle with axle housing tube inside diameters of 2" or larger and axle shaft seal inside diameters of 1-3/4" or smaller. This handy tool knocks out those tricky inner axle shaft seals in a flash! In addition, our space saving two piece rod threads together for removing the long side seal. Use just the long rod for knocking out the short side seal. Applications include 2003-2018 Dodge RAM AAM 925 Front Axle and Dana 60 Front axles without CAD through the 1997 model year plus 2005-up Ford Super Duty Dana Super 60 Front Axles. Kit includes QT1145 drive rod, QT1151 extension rod, QT1214 seal remover, and 2 QU95007 Grade 8 jam nuts. Both QT1145 and QT1151 are made from U.S. produced 1.25" diameter steel and have wrench flats machined in the shaft. Rods, Remover, and Nuts are USA Made.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Inner Axle Seals
Seal Installation
Available Attachments
Front Axle Shaft Oil Seal Remover Tool Sets
Applications:

Tech Note 1: Inner Axle Seals
Most inner axle seals are located right next to the differential and are impossible to replace without disassembling the axle up to and including the differential. Once everything except the pinion gear is removed, you drive the seals inward until they drop into the housing.

Tech Note 2: Seal Installation
Once the seals are removed, you need to clean any dirt, grit or crud out of the diff housing and axle tubes. After that, you can install your new seals. Seal installation is best done with our tooling made for your specific application. Sometimes you can get by with makeshift installers you cobble together, but in most cases, using makeshift tools just guarantees you get to do the job all over again.

Tech Note 3: Available Attachments
Our currently available attachments are:
QT1144: Fits axle tube inside diameters of 1.75" and larger. Max seal ID with rubber lip seals is 1.5", max seal diameter with oil bath type seal is 1-9/16" (used on Ford Excursion and Super Duty® Model 50 and 60 monobeam axles from 1999 to 2004). This remover fits most Model 30, Model 44, and GM 10 Bolt front axles. The outside diameter is made to fit through the inner plastic axle guides used on 1999-2004 Ford Super Duty and 2000-2005 Ford Excursion.
QT1214: Fits axle tube inside diameters of 2.00" and larger. Max seal ID 1-3/4". This remover fits most Model Model 44, Model 50, Model 60, Model 61, Model 70, AAM 925, and GM 10 Bolt front axles with 3" or larger outside diameter axle tubes.
QT1216: Fits axle tube inside diameters of 2.25" and larger. Max seal ID 2". This remover is primarily made to remove the large bore, right side seal on 2000-2002 Dodge Ram 2500 and Ram 3500 trucks with vacuum controlled Central Axle Disconnect (CAD). It will also work on all to remove the left seals on the same model trucks, plus either seal on all 2002 and newer Dodge Ram 2500 and Ram 3500 models and all 2005 and newer Ford Super Duty® F-250, F-350, F450, and F-550 4x4s.
For Smaller Axles: For axle tube diameters between 1.50" and 1.75", you just use QU95007 nut as the remover.

Tech Note 4:Front Axle Shaft Oil Seal Remover Tool Sets
Our Front Axle Shaft Oil Seal Remover Tool Sets are:
QK4647: Includes TS4563 Rod Assembly and QT1144 Remover (Most smaller axles plus Ford Excursion and 1999-2004 Super Duty®)
TS1184: Includes QT1145 Rod, QU95007 Nut, and QT1214 Remover (Specific Kit for most Dodge with CAD)
TS4862: Includes TS4563 Rod Assembly and QT1214 Remover (Most larger axles except 2000-2002 CAD equipped Ram 2500 and Ram 3500 or Ford Excursion and 1999-2004 Super Duty®)

Applications:

Chevy and GMC:
K30, K35, K3500, V3500 Dana 60 Front Axle: 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991

Dodge and Ram:
W250, W350 with Dana 60 or Dana 61 Front Axles: 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993
Ram 2500, Ram 3500: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Ram 1500 with Mega Cab: 2004, 2005, 2006, 2007, 2008, 2009, 2010

Ford:
F250 with optional Dana 60 Front Axle: 1978, 1979
F350: 1979
F350: 1985.5, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997