Tools 1980-1984 Dodge Dana 44

QT1025 Universal 4 Lug/6 Lug Front or Rear Spindle Nut Socket fits all 6 slot Dana Spicer 50/Model 60 front axles and most 4 slot Dana Spicer Model 30/Model 44 or GM 10 bolt front spindle nuts on Chevy, Dodge, Ford, GMC, IHC, and Jeep front axles. Also...

QT1100 1" x 8" Standard Duty Installer Driver Handle with 5/8" Tip and knurled hand grip is used with QT1500 series Seal Installers and QT1800 series Bearing Cup Installers with 5/8" center holes. QT1100 will become one of the most used tools in...

QK4647 Front Axle Inner Oil Seal Remover Set with 1-3/4" Driver Tip for many common front inner axle oil seals is a real time saver! Use to remove the inner axle shaft oil seals on any 4x4 solid front drive axle with axle housing tube...

QT1801 82mm to 3-1/4" OD Transmission, Pinion, Front or Rear Wheel Bearing Cup Installer is used to install many of the Bearing Cups used in Chevy, Dodge, Ford, GMC, and Jeep full sized SUV's, 1/2, 3/4 and 1-ton trucks from 1968 to current. QT1801 fits...

QT1116 8" Pro Duty Installer Driver Handle with knurled hand grip are used with QT1500 series Seal Installers and QT1800 series Bearing Cup Installers with 5/8'" center holes. Black Oxide finish. 1.25" diameter x 8" usable length for general purpose...

QT5500 Wheel Bearing Packer with Cover takes the mess out of packing wheel bearings, plus it minimizes the chances of getting contaminants mixed with your wheel bearing grease. I have been using mine for many, many years! The QT5500 Bearing Packer does...

QT1012i Value 4 Lug 4x4 Front Spindle Nut Socket is a durable, 1/2" drive special socket that fits 4 slot spindle nuts used on many axles from the late 1950's to 1996 including Dana 28IFS, Dana 30, Dana 35IFS, Dana 44, Dana 44IFS, Dana 60, and GM 10...

QT1101 14" Standard Duty Installer Driver Handle with knurled hand grip are used with QT1500 series Seal Installers and QT1800 series Bearing Cup Installers with 5/8'" center holes. 1" diameter x 14" usable length for deep seated seals and bearings...

QT1119 14" Pro Duty Installer Driver Handle with knurled hand grip are used QT1500 series Seal Installers and QT1800 series Bearing Cup Installers with 5/8'" center holes. 1.25" diameter x 14" usable length for deep seated seals and bearings. Made in...

QT1044 1-5/16"-1-3/8" Inner Pinion Bearing Installer for Ford 9"rear axle, Dana 25, Dana 27, Dana 30, Dana 44, Dana 44IFS, Dana 50, and Dana 50IFS front/rear drive axles or other applications that require installing bearings with 1-5/16" to 1-3/8"...

QT1032 USA Made Dana 25-Dana 80 Differential Case Spreader for Dana-Spicer Axles Dana Axles are designed to have a differential bearing preload of .010"-.015". With our Case Spreader, removing and installing front and rear differentials on your 4x4 is...

QT1812 Outer Pinion Bearing Cup Installer is used to install many of the Bearing Cups used in Chevy, Dodge, Ford, GMC, and Jeep SUV's, 1/2, 3/4 and 1 ton trucks from 1942 to current. QT1812 fits our QU50400 (Dana Axle Outer Pinion), QU50539 (Inner or...