Tools 1972-1986 Jeep Dana 30 Front

QT1100 1" x 8" Standard Duty Installer Driver Handle with 5/8" Tip and knurled hand grip is used with QT1500 series Seal Installers and QT1800 series Bearing Cup Installers with 5/8" center holes. QT1100 will become one of the most used tools in...

QK4647 Front Axle Inner Oil Seal Remover Set with 1-3/4" Driver Tip for many common front inner axle oil seals is a real time saver! Use to remove the inner axle shaft oil seals on any 4x4 solid front drive axle with axle housing tube...

QT1011 2-1/16" Hex Front Spindle Nut Socket for 1946-1986 Jeep CJ-5, CJ-6, CJ-7, and CJ-8 (Scrambler) and most other Jeep vehicles from 1942-1971 EXCEPT M715 series. This Special Thin-Wall 1/2" drive socket is an absolute necessity to properly service...

QT1044 1-5/16"-1-3/8" Inner Pinion Bearing Installer for Ford 9"rear axle, Dana 25, Dana 27, Dana 30, Dana 44, Dana 44IFS, Dana 50, and Dana 50IFS front/rear drive axles or other applications that require installing bearings with 1-5/16" to 1-3/8"...

QT1802 Bearing Cup Installer is specifically machined to fit QU10142, QU10145, QU50447, QU50629, and QU50653 bearing cups commonly used in axle, transmission and wheel applications. Precision CNC machined solid steel tool is drilled to accept any...

QT1075 1/2" Drive Ball Joint Adjuster Sleeve Socket for a host of domestic 4x4s from 1969 to 1993. QT1075 also fits 2018 and newer Mahindra Roxor 4x4s. Chevy, Dodge, Ford, GMC, International, Jeep all used the QU40187 Ball joints on just about every 4x4...

TS4800 Inner Axle Seal Installer Tool Set for 1972-Current small Jeeps with standard Model 30 front axles with no CAD (central axle disconnect). Includes QT1139 Axle Seal Installer, QT1189 Press Screw Assembly, and QT1186 Thrust Plate...

QT1036 Differential Press Step Plate for Dana 25, Dana 27, Dana 30, GM 10 Bolt, and early Ford 9" axles. QT1036 is used when pulling and/or installing your differential bearings. These plates fit in the axle shaft hole of your differential. Use as a...

QT1186 Seal Installer Thrust Plate for Dana 30 and GM 10 Bolt Front Axles is used with QTA1133 (1977-1991 GM 10 Bolt) or QT1189 (1972-current Dana 30) Press Screw and the correct Seal Installer for your axle to install the inner axle shaft oil...

QT1508 Front Wheel Seal Installer for IHC Scout and Jeep CJ is specifically made to install QU50225, QU15015, and QU15016 inner wheel seals to the correct depth without damaging the seal. Applications include 1973-1980 Scout models and to mid 1976-1986...

QT1079 1972-1978 Jeep CJ Inner Axle Seal Installer for Early Production Seals installs 1972-1978 original equipment type QU40057 Seals on 1972-1978 Jeep CJ's with Dana Spicer 30 front axle. USA Made. Need More Info? Use the...