Tools 1959-1966 Ford Dana 44, 44HD

QT1805 3-1/2" Wheel and Pinion Bearing Cup Installer is used to install many of the Bearing Cups used in Chevy, Dodge, Ford, GMC, International, and Jeep 3/4 and 1 ton trucks from 1954 to current. Use QT1805 for QU50406, QU50570, QU50606, (inner...

QT1041 Inner Front Axle Shaft Oil Seal Installer for Dana 44 Front Axles installs the QU40055 current design original equipment CR made seal in many older 4x4 trucks with Dana-Spicer Model 44 axles. Our QT1041 has a depth stop making it easy to install...

QT1200 Tie Rod Separator separates most tie rods, drag links, & track bars without damaging the stud or seal with this rugged puller. Way better than a "pickle fork", A real time saver! Made in Taiwan. NOT FOR IMPACT USE! Need More Info? Use the...

QT1504 Dana 30, Dana 44 and GM 10 Bolt Front Wheel Seal Installer is specifically made to install QU50091 and QU50654 inner wheel grease seals to the correct depth without damaging the seal. Applications include many 1960 to early 1990s Chevy,...

QT1813 King Pin or Knuckle Bearing Cup Installer for Dana 44HD, 60, 61, 70 and 1943-1971 Dodge Power Wagon Front Axles is used to install QU50601 or Timken 23256 Steering Knuckle Bearing Cups in 1958-1982 closed knuckle Dana 44HD, Dana 60, Dana 70...

QT1161 Seal Installer Thrust Plate for 1955-2006 Dana 44 Front Axles is used with QT1165 Press Screw and the correct Seal Installer for your axle to install the inner axle shaft oil seals in 1955-2006 Dana 44 4x4 solid beam front axles without vacuum...

QT1115 Dana 44 Differential Side Bearing Installer for all Dana-Spicer Model 44 front or rear axles. QT1115 features a raised internal ring that contacts the bearing inner face so you can press or drive your diff bearings on without damaging the cage...

QT1229 HD Differential Bearing Puller for most 3/4 and 1 ton front or rear axles.

QT1803 Front Inner Wheel Taper Bearing Cup Installer for installing LM603011 Bearing Cups in many 1/2 ton to 3/4 ton 4x4 front wheel hubs. Precision CNC machined solid steel tool is drilled to accept any driver handle with a 5/8" tip. USA Made. Need...

QT1023 4x4 Triple Standard Thread Front Spindle Puller fits any 5/8" Slide Hammer to quickly and easily remove those rusted in front wheel bearing spindles on your 4x4 without damage! Essential for servicing axle u-joints, ball joints, spindle bearings,...