- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
QK4729 1981-1997 Dana 50, 60 3-Piece, Round Front Spindle Nut Kit
4729$57.98QK4729 1981-1997 Dana 50, Dana 60 3-Piece, Round Front Spindle Nut Kit with 4 Slot Spindle Nuts includes one each of these genuine Dana Spicer parts: QU40163 Outer Spindle Nut, QU40164 Spindle Lock Washer, and QU40166 Inner Spindle Nut with Pin. This nut... -
QU95037 1/2" SAE Fine Thread Class C All Metal Lock Nut
95037$2.98QU95037 USA Made 1/2" SAE Fine Thread Class C Grade 8 Lock Nut for Front Spindle and Universal Applications is a high quality, American Made, all-metal, high-strength, prevailing torque type locknut most commonly used to secure the front axle... -
QA40168 Dana 50/60 Spindle Bearing and Seal Kit
40168$32.98QA40168 Dana 50/60 Spindle Bearing and Seal Kit has genuine Dana Spicer original equipment components. This Kit replaces your worn original equipment parts on 1975-1993 3/4 ton and 1 ton Chevy, Dodge, Ford, GMC, and IHC 4x4 trucks equipped with Dana... -
QU40051 2" Tabbed Spindle Nut Lock Washer for Dana 60, Dana 70 Axles
40051$6.98QU40051 Bend Over Tab 2" ID Spindle Lock Washer with Wide Key Tab fits 2" diameter spindles that use hex nuts measuring either 2-1/2" (QU40052) or 2-9/16" (QU11070) across the flats. This genuine original equipment, non reusable, Dana Spicer washer was... -
QU40541 Knuckle to Spindle Bolt Chevy, Dodge, GMC Dana 60 Front Axles
40541$5.98QU40541 Dana 60 and Dana 61 Spindle to Knuckle Bolt (Stud) is a genuine original equipment Dana Spicer, heat-treated, serrated press-in, special head bolt that fits the steering knuckles on 1970s to 1990s Dana 60 and Dana 61 front drive axles in Dodge... -
QU40064 Outer Axle Shaft Slinger
40064$6.98QU40064 Outer Axle Shaft Slinger is a genuine Dana Spicer part that press fits on the outer axle shafts of Model 50 IFS, Model 60, and Model 61 open knuckle front drive axles equipped with serviceable front wheel bearings. QU40064 deflects road splash... -
QU40166 Dana 50, Dana 60 4 Slot Front Inner Spindle Nut with Pin
40166$27.98QU40166 Dana 50, Dana 60 4 Slot Front Inner Spindle Nut with Pin is a genuine Dana Spicer part that fit 1980s and 1990s Dana Spicer Model 50IFS, Model 60, and Model 61 front drive axles using 4 slot, round spindle nuts. USA Made. Also see QU40166U... -
QU40065 Large Spindle to Axle Shaft V-Seal Dana 50IFS, Dana 60/61 Axles
40065$9.98QU40065 Large Spindle V-Seal is a genuine Dana Spicer part that fits between the spindle and QU40064 outer axle shaft slinger on Dana Spicer Model 50 IFS, Model 60, and Model 61 open knuckle front drive axles equipped with serviceable front wheel... -
QU40066 Dana 50/60 Outer Axle Shaft to Spindle Thrust Washer
40066$5.98QU40066 Dana 50/60 Outer Axle Shaft to Spindle Thrust Washer is a genuine Dana Spicer part that fits on your outer axle shaft to control thrust between the axle shaft and spindle. USA Made. Need More Info? Use the handy Links below to access over 40... -
QT1110i High-Torque, 4 Prong Spindle Nut Wrench
881110$24.98QT1110i Heavy Duty, High-Torque, 4 Lug Spindle Nut Wrench for Dana 50 and Dana 60 Front Axles fits Dana Spicer 50, 60, and 61 front drive axles with 4 slot double spindle nuts (QK4729) and serviceable wheel bearings from 1981-1997. Reinforced,... -
QU40149 Dana 50, Dana 60 Spindle Bearing
40149$24.98QU40149 Dana 50, Dana 60 Spindle Bearing is a genuine Dana Spicer original equipment part that is a press fit in the back of the spindle. This bearing is the primary support for your outer axle shaft. USA Made. Need More Info? Use the handy Links below... -
QU40148 Small Spindle to Axle V-Seal for Dana 50IFS, Dana 60/61 Axles
40148$8.98QU40148 Dana 50/60 Small Spindle V-Seal is a genuine Dana Spicer part that fits in the back of your spindle between QU40149 spindle bearing and QU40066 thrust washer on Dana Spicer Model 50 IFS, Model 60, and Model 61 open knuckle front drive axles...