NV4500 Tools 1992-2007 GM NV4500

QT1100 1" x 8" Standard Duty Installer Driver Handle with 5/8" Tip and knurled hand grip is used with QT1500 series Seal Installers and QT1800 series Bearing Cup Installers with 5/8" center holes. QT1100 will become one of the most used tools in...

QT1801 82mm to 3-1/4" OD Transmission, Pinion, Front or Rear Wheel Bearing Cup Installer is used to install many of the Bearing Cups used in Chevy, Dodge, Ford, GMC, and Jeep full sized SUV's, 1/2, 3/4 and 1-ton trucks from 1968 to current. QT1801 fits...

QT2002 NV4500LD Mainshaft Nut Wrench QuadTool™ is a necessity to remove or install the mainshaft nut. Required for all in-vehicle and bench repairs that involve mainshaft service, including mainshaft fifth gear replacement. Fits Dodge Gas 6/V8...

QT2005 1-5/8" Capacity Bearing Installer and NV4500 Input Seal Installer for Transmissions and Axles This is our most popular Pinion and Transmission Bearing Installer. QT2005 was originally designed to install the Input Bearings, Countershaft Rear...

QT1101 14" Standard Duty Installer Driver Handle with knurled hand grip are used with QT1500 series Seal Installers and QT1800 series Bearing Cup Installers with 5/8'" center holes. 1" diameter x 14" usable length for deep seated seals and bearings...

QT2004 Counter Shaft Front Bearing Installer QuadTool™ is used to press or drive on QU10142 Countershaft Front Bearing Cup onto the front of your New Venture NV4500 Countershaft. The quick and easy installation prevents damage to tapered...

QT2006 Countershaft Support QuadTool™ is used to protect the countershaft front bearing and cup when pressing on the rear countershaft bearing. The support slips inside the front cup and rests on your work bench or press bed. Included with many...

QT2008 1-2 Synchro Support QuadTool™ makes assembly of the 1-2 Synchronizer assembly a lot easier. This tool supports the synchro hub while you compress the struts and slide the synchro sleeve into place. Included with many NV4500...

QT9300 3/16" x 8" Punch has the extra long shank required to remove NV4500 transmission shift fork roll pins and other hard to reach applications.

QT1802 Bearing Cup Installer is specifically machined to fit QU10142, QU10145, QU50447, QU50629, and QU50653 bearing cups commonly used in axle, transmission and wheel applications. Precision CNC machined solid steel tool is drilled to accept any...

QT2028 GM 4x4 Output Shaft Nut Socket removes/installs the mainshaft nut on all GM 4500's with or without a vibration dampener. 3/4" Drive. Required for all mainshaft related repairs when the transmission is equipped with a vibration dampener (mainly...

QT1020 10mm 12 Point 1/2" Drive Impact Socket for removing/installing 6 point and 12 point 12mm fasteners on many popular applications including Rear Housing Bolts on NV4500 5 speed manual transmission.. Essential to remove those special, hi-torque, 12...