FAQs

Question: I want to convert my externally splined hubs in my 1973-1977.5 Chevy or Jeep 3/4 ton truck with Dana 44 front axles to have internally splined hubs. What will I need? Answer: You will need new spindles and out. Verify if your rotor is in good...

Question: What is the location of the rings inside the hub of a 1974-1979 Dodge dana 44 live spindle front axle? Answer: One ring is used per side, and each ring is matched to a specific bearing set. The overall thickness of the ring will vary from set...

Question: My front axle on my lifted 1989-1992 Dodge W250 or W350 Cummins Diesel is binding up and hitting the front u-joint straps on the axle side. How do I alleviate this? Answer: The 1989-1992 Dodge W250 and W350 with a Cummins Diesel uses a small,...

NV4500 Frequently Asked Questions Table of Contents What are the gear ratios of NV4500 and Getrag G360 transmissions? What are the NV4500 design specifications? What are the major design changes? I "lost" 5th gear, what happened? Why does my NV4500...

Problem: 1992-1993 Dodge NP205 Transfer Case Jumps Out of Gear Possible Causes (Note: There may be a combination of issues listed below causing the problem):A) Shift Lever Hits Gate before Transfer Case is Fully Engaged: Adjust Brackets (See Photo...