- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
QU42187 8 Bolt Knuckle Seal Kit
42187$34.98QU42187 Replacement 8 bolt Knuckle Ball Seal Kit for Dana 25, 27, 30, 44 closed knuckle front axles is a good quality, low price reproduction Knuckle Seal Kit for all 1941-1975 Dana 25, Dana 27, Dana 30, and standard Dana 44 Closed Knuckle Front Axles in... -
QU40188 8 Bolt Spicer Knuckle Seal Kit for Dana 25, 27, 30, 44 Front Axles
40188$100.98QU40188 8 Bolt Knuckle Ball Seal Kit for Dana Spicer Front Axles is genuine original equipment for light 3/4 ton and smaller Dana closed knuckle front axles in 1951-1975 4x4s with Dana Spicer Model 25, Model 27, Model 30, or standard Model 44 front drive... -
QU20091 0.005" Trapezoid King Pin Shim Dana 44 Closed Knuckle Axles
20091$10.98QU20091 Drivers Side Upper King Pin 0.005" Trapezoid Knuckle Shim for Dana 44 Front Axles with combination steering arm/king pin having a trapezoid bolt pattern are used to adjust the turning preload for the Drivers Side Steering Knuckle on many 1960's... -
QK4617 Dana Axle Small Knuckle Bearing and Shim Kit
4617$243.98QK4617 Dana Closed Knuckle and 1966-1971 Ford Open Knuckle Dana Axle Small Knuckle Bearing and Shim Kit includes 4 Timken® QU50628 Knuckle Bearings, 4 Timken® QU50627 Knuckle Bearing Cups, and 2 TKA4939 Premium Torque King® Rectangular... -
QU42009 7/16" OE Taper Lock Wedge Dana Rear Steering Arms & Axle Shafts
42009$17.98QU42009 Original Equipment 7/16" ID Tapered Locking Bushing Cone for Dana Full-Floating Rear Axles and Dana 44 Front Steering Arms fits 1990 and earlier Dana 60, Dana 60HD or Dana 70 full floating rear axle shafts with tapered holes in the drive flange... -
QU50628 King Pin or Knuckle Bearing Dana 25, 27, 30, 44 Axles
8950628$42.98QU50628 Small Knuckle or King Pin Bearing fits all 1941 to 1975 Dana 25, Dana 27, Dana 30, and Dana 44 Standard Duty closed knuckle front axles in Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s. QU50628 is also used on all 1966 to 1971 Ford Bronco and Ford... -
QU50627 Timken® Small Knuckle Bearing Cup
50627$12.98QU50627 Timken® Small Knuckle Bearing Cup fits all 1941 to 1975 Dana 25, Dana 27, Dana 30, and Dana 44 Standard Duty closed knuckle front axles in Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s. QU50627 is also used on all 1966 to 1971 Ford Bronco... -
QU40773 Basic Closed Knuckle Shim Kit for Dana 25, 27, 30, 44 Axles
40773$10.98QU40773 Basic Knuckle Shim Kit for Dana Closed Knuckle Front Axles with 8 Bolt Ball Seals includes a variable amount of nominal 0.007" thick rectangular shims (usually 16-20) with a total thickness of over 0.100" used for setting knuckle rotating preload... -
TKA4939 11 Piece Premium Steering Knuckle Shim Kit Dana 25-44 Axles
4939$49.98TKA4939 Premium Torque King Knuckle Shim Kit for Dana Closed Knuckle and Ford Open Knuckle Front Axles TKA4939 fits all Dana 25-Dana 44 closed Knuckle Front Axles with 8 Bolt Ball Seals and 1966-197 Ford Dana 30. Dana 44 open knuckle front axles. Kit... -
TK50784 Small Knuckle King Pin Bearing Only Kit
50784$168.98TK50784 Small Knuckle Bearing Only Kit fits all 1941 to 1975 Dana 25, Dana 27, Dana 30, and Dana 44 Standard Duty closed knuckle front axles in Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s. QU50628 is also used on all 1966 to 1971 Ford Bronco... -
QT1819 Knuckle Bearing Cup Installer for Dana 25, 27, 30 & 44 Front Axles
1819$26.38QT1819 Knuckle Bearing Cup Installer for Dana 25, 27, 30 and 44 Front Axles is used to install QU50627 Steering Knuckle Bearing Cups in 1953-1975 standard duty Dana 25, 27, 30, 44 closed knuckle front axles in Chevy, Dodge, Ford, GMC, IHC, Jeep, and... -
QU42009U Used 7/16" ID Tapered Locking Bushing Cone
5542009$9.98QU42009U Used 7/16" ID Tapered Locking Bushing Cone for Dana Rear Axles and Dana 44 Front Steering Arms fits 1990 and earlier Dana 60, Dana 60HD or Dana 70 full floating rear axle shafts with tapered holes in the drive flange as found in many older...