Shop now for Inner Axle Shaft Seals and Seal Kits to fit 1972-1975 Ford F-100 with Dana 44 Open Knuckle Front Axles.
All 1972-1975 Ford 4x4 models with Dana 44 front axles have Inner Axle Shaft Oil Seals pressed in the inboard end of each axle tube, right next to the differential side bearings. These seals contact the inner axle shafts to prevent gear oil from running out of the differential and down the axle tubes. Old age, blown axle u-joints, and/or grit that works it's way into the axle tubes and cuts the seal are the usual causes of failure. A bad Inner Axle Shaft Seal can be detected by oil coming out the end of the axle tubes next to the axle shaft u-joint. Usually when these Seals start to fail, they will seep oil so the leakage may go undetected for quite some time. Many a ring and pinion set has been burned up from axles that lost all their lube when long term seepage was not noticed. Different Seals were used depending upon year and axle tag number. Axle disassembly including differential removal is required to replace the Inner Axle Shaft Seals.