null

Recently Viewed Products

1975-1993 Dodge Dana 60 Front Axle

Shop now for Parts, Tools, and Shop Manuals specific to 1975-1993 W200, W250, W300, W350 4x4 trucks with Dana 60 Front Axles. We stock a large selection of Front Axle parts for 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, and 1993 model year 4x4s. Except for wheel hubs and brake rotors, 1975-1993 Dana 60 front axles share a high percentage of the same parts for all years.

We stock a complete line of parts for the open knuckle, Dana-Spicer Model 60 Front Axle which was first used by Dodge in the 1 ton W300 4x4 trucks for the 1975 model year. The newly released Model 60 axle used the same size axle universal joint as the previous Model 70 closed knuckle axle, but the new open knuckle design had a sharper turning angle which substantially improved vehicle maneuverability.

The Model 60 as used by Dodge from 1975 to 1993 has very durable greaseable king pins and disc brakes. The wheel bearings are serviceable and the dead-spindle configuration allows the use of lockout hubs. The only major design change during the 18 year production run of this axle was a change in 1990-1991 from wheel hubs using externally mounted free wheel hubs (or drive flanges) to hubs with splined internal mount lockouts. Available factory gear sets over the years included 3.54, 4.10, 4.56, 4.88, and 5.86 ratio ring and pinions. Model 61 axles can be found in 1987 to 1993 model year trucks with 3.07 or 3.54 ratio gear sets. The model 61 is basically a modified Model 60 with a different ring gear offset to accommodate a larger diameter pinion gear. Except for the differential housing and some differential components, all the parts are interchangeable between the two models. You will find these fine axles in almost all Dodge 1 ton models from 1975 to 1993, plus all the 1989 to 1993 Cummins Diesel W250 and W350 4x4s. The only 1 ton exceptions are a few 1975 W300 trucks with the Model 70 closed knuckle axle, and a small number of mid 1980's trucks with wimpy Model 44 axles that Dodge badged as W-350 1 ton models. Dodge was the last vehicle manufacturer to offer a truck with a King Pin front 4x4 Model 60, discontinuing this axle at the end of the 1993 model year. The redesigned 1994 Dodge Model 60 uses ball joints instead of king pins and has a live-spindle, non-serviceable wheel hub.

1975-1993 Dodge Dana 60 Front Axle

There are no products listed under this category.