TS4219 Inner Axle Tool Set 2019-up Ram 45/55 AAM 10.5 Front

TS4219 Inner Axle Seal Tool Kit for 2019-up RAM 4500 and RAM 5500 with AAM 10.5" front axles. Precision CNC made installation tools are specifically made to quickly and easily install the optional QU11897 Genuine AAM 10.5" Front Axle Shaft Oil Seals to the correct depth without damaging, cocking, or crushing the rather delicate seals. Our QK4219 Kit makes inner axle oil seal installation easy and almost fool-proof on your big RAM 4x4 equipped with the AAM 10-1/2" front drive axle! Tools Made in Montana.

Also See QK4219 Axle Seal Installer Tool Set with Seals

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Includes
Must Remove
Seal Type
After Installing
Applications

Tech Note 1: Includes
TS4219 Kit includes:
QT1565 Seal Installer
QT1130 Thrust Plate
TS1566A Press Screw Assembly

Tech Note 2: Must Remove
To replace your Inner Axle Shaft Oil Seals, you have to remove the brakes, hubs, axle shafts, and differential.

Tech Note 3: Seal Type
QU11897 is an oil bath type seal. The actual seal surface is internal, meaning the inner sleeve of the seal rotates within the outer body. With this design, the outside diameter of the seal shell is a press fit in the axle housing. The inside diameter of the rotating sleeve is an interference fit on the axle shaft. If you had to use a pry bar to get your axle shafts out, it was due to the tight fit between the axle shaft and seal.

Tech Note 4: After Installing
After installing your new seals, lubricate the inside of the rotating sleeve with a thin film of grease or petroleum jelly. Doing so will ease axle shaft installation and minimize corrosion on that axle shaft seal surface.

Applications:
Ram:
RAM 4500, RAM 5500: 2019, 2020, 2021, 2022, 2023, 2024