QU56018.5 1 Side Manual Hub Set

QU56018.5 1 Side WARN Original Equipment Type Internal Spline Mount Manual Hub is a reliable, original equipment quality 4x4 Free-Wheel Hub with rugged, time proven plastic dial for internally splined front wheel hubs on 1957-1994 Ford, 1969-1993 Dodge, 1969-1991 Chevy, 1969-1991 GMC, 1964-1973 IHC, and 1974-1991 Jeep 4x4 vehicles. Warn 9790 Lockout Hub was used on many original equipment axles from 1980-1992. Perfect for replacement or upgrade, 9790 Hub fits most Dana 30, Dana 44, Dana 44HD, Dana 44IFS, and GM 10 bolt Front Drive Axles equipped with splined front wheel hubs.

WARN 9790 Standard Hubs are the ideal choice for OEM hub replacement. These are the same basic hubs Warn Industries has supplied to OEMs around the world. WARN standard hubs share many features with our premium hubs such as a 4140 steel clutch ring and inner drive gear and a precision cast hub body. Warn 9790 hubs are covered by a lifetime limited warranty.

Also See: QU56018 Both Sides Hub Set

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Hub Service Kit
Before Installation
Spindle Nuts
Spring and Spring Plate
Inner Thrust Washers and Snap Rings
Matching Parts
Applications

Tech Note 1: Hub Service Kit
For QU56018 Hub Service Kit, See: QK4918.

Tech Note 2: Before Installation
Lightly coat the axle shaft and wheel hub splines with grease before installation.

Tech Note 3: Spindle Nuts
Ford models originally equipped with automatic hubs and a single spindle nut will require replacing the original spindle nuts with two QK4727 Spindle Nut and Washer Sets.

Tech Note 4: Spring and Spring Plate
If you are replacing a Spicer factory hub set or Spicer/GM full time drive gear, you DO NOT reuse the original QU40050 Spring and QU40035 Cupped Spring Plate.

Tech Note 5: Inner Thrust Washers and Snap Rings
Some original axle shafts had an axle shaft snap ring located back by the spindle. Typically, these snap rings retained either a one-piece or three-piece thrust washer against the spindle. On most of these later model applications, the inner thrust washer(s) and snap ring are NOT used with this hub!

Tech Note 6: Matching Parts
Matching Parts for QU56018.5 Hub Set:
QK4918 Hub Service Kit
QK4727 Spindle Nut and Washer Set
Chevy & GMC Shop Manuals
Dodge & Ram Shop Manuals
Ford Shop Manuals
Jeep Shop Manuals

Applications

Chevy and GMC:
Blazer, Jimmy, 1/2 ton Pickup and Suburban: 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
3/4 ton Pickup and Suburban: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991

Dodge and Plymouth:
W100: 1969, 1970, 1971, 1972, 1973, 1974
Ramcharger, Trailduster, W100, W200 (with Dana 44 Axle): 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993

Ford:
F100, F150 (except 1987-1989 with flange mount hub-locks): 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992
F250 with standard Dana 44 closed knuckle axle: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975
Bronco (except 1987-1989 with flange mount hub-locks): 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992
F-250 with Dana 44 or Dana 44IFS Front Axles: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988

International:
1/2 ton with internally splined wheel hub: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975

Jeep:
Full Size Wagoneer, Cherokee, Grand Wagoneer: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
J10 Pickup: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988
J20 Pickup: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988