QU40535U Used Dodge Full Float Rear Axle Shaft to Wheel Hub Bolt

QU40535U Used Dodge Full Float Rear Axle Shaft to Wheel Hub Bolt is a 7/16" flange-head Bolt with 9/16" hex head for attaching your full-float axle shafts to the wheel hubs on 1993 and prior Dodge D250, W250, D300, W300, D350, and W350 trucks with Dana 60 or Dana 70 Full Float Rear Axles using bolts for axle shaft retention. Sold Individually. Available while supplies last.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Threadlocker
Studs or Bolts?
Appearance
Applications

Tech Note 1: Threadlocker
Apply Threadlocker to the Bolt threads before installation.

Tech Note 2: Studs or Bolts?
Pretty much all the 1990 and earlier Dodge Dana 70 Rear Axles that I have worked on use studs with tapered wedge bushings for attaching the axle shafts to the wheel hubs. For the Dodge Dana 60, bolts started replacing studs in the 1970's, but the changeover was not uniform depending upon the vehicle. If your Axle Shafts are made for the tapered bushings, you can not use bolts.

Tech Note 3: Appearance
Dana has changed fastener suppliers over the years, so the new production Dana Bolts we supply may look slightly different than your original Bolts.

Applications:
Dodge:
D250, W250, D300, W300, D350, and W350 trucks with Dana 60 Full Float Rear Axles using bolts for axle shaft retention: 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979
D250, W250, D300, W300, D350, and W350 trucks with Dana 70 Full Float Rear Axles using bolts for axle shaft retention: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993