Description
This part has been superseded by QU40509 which is 1/4" shorter. Also you need to remove the stamped steel slinger.
QU40379U Used 2000-2002 Dodge Dana 60 Front Pinion Yoke for 2000-2002 Dodge Ram 2500 and 3500 4x4 trucks for your Dana 60 front axle. Does not include slinger as one was not used on the original yoke. Available while supplies last.
Also See: QU40379 New 2000-2002 Dodge Dana 60 Front Pinion Yoke
Also see QK4840 Pinion Yoke Kit.
Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes:
U-Joint Specs
Seals
Product Note
Pinion Preload
1994-1999 Pinion Yoke Kit
Matching Parts
Applications
Tech Note 1: U-Joint Specs
QU40379U is made to accept external snap ring universal joints made to Spicer 1330 series dimensional specifications. Overall installed width of the u-joint is 3-5/8". Cup diameters are 1-1/16". Order TK40721 or QU40774 universal joints separately.
Tech Note 2: Seals
2000-2002 axles all have two-piece pinion seals consisting of an inner oil seal and an outer wiper seal. The outer wiper V-Seal is the same for all 2000-2002 axles, but two different, non-interchangeable inner oil seals were used so if you have a 2000-2002 truck, you will need to verify which seal your truck needs before ordering.
Tech Note 3: Product Note
The original QU40379U pinion yoke does not use an outer seal slinger and it is 1/4" longer than a "standard" Dana 1330 series pinion yokes like our QU40509.
Tech Note 4: Pinion Preload
Pinion rotating preload is set by a crush sleeve (QU40356). When tightening your pinion nut, you have to be very careful as it will only take a small movement of the nut to go from too loose to too tight. If you over tighten the nut, you MUST get a new spacer and start over!!! Never back off the nut to try and reduce the rotating preload of the pinion!!!! See TM4400 or the factory shop manual for your truck for rotating preload specs.
Tech Note 5: 1994-1999 Pinion Yoke Kit
See QK4653 Model 60 Pinion Yoke for all 1994-1999 Dodge Ram 2500 and Dodge Ram 3500 4x4 trucks with Dana 60 front axles.
Tech Note 6: Matching Parts
Matching Parts for QU40379U Pinion Yoke:
QU40356 Crush Sleeve
QU40095 Outer Pinion Oil Slinger
QU40348 Early to Mid Production Pinion Seal
QU40402 Late Production Pinion Seal with Flanged Shell
QU40397 Pinion V-Seal
QU40022 Pinion Nut
QU40023 Pinion Washer
QU40356 Pinion Crush Sleeve
QU40735 U-Joint Strap/Bolt Kit
TK40721 or QU40774 Universal Joints
S9978 Medium Strength Threadlocker
Applications
Dodge:
Ram 2500 and Ram 3500 4x4 Front Axles: 2000, 2001, 2002
Warranty
Product Reviews
Delivery & Returns
Shipping times are estimated in your cart.
More info can be found at the link below.
