QU40300U Used D60 Diff OP Shaft

QU40300U Used Dodge Dana 60 Differential Output or Intermediate Shaft for all 1994-1999 Dodge Ram 2500 4x4 trucks with 8800 lb. or higher GVW. QU40300U Differential Output or Intermediate Shaft also fits on all 1994-1999 Dodge Ram 3500 4x4 trucks. This shaft is the innermost shaft on the right (passenger) side. It is installed through the right axle tube and pushed all the way in until the splines on the inboard end are fully engaged with the differential side gear splines. This shaft is horizontally free floating; there are no retainers to hold it in place. Sideways movement is limited by the Differential Cross Shaft and the Bushing (QU40107 ) pressed in the inner end of your Right Inner Axle Shaft (QU40247 ). The Shaft is supported on the 30 spline driven end by the Differential, and the 15 spline drive end by a needle bearing (QU40292).

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Related Parts
Applications

Tech Note 1: Related Parts
QU40107 CAD Axle Shaft support Busing
QU40247 Inner Axle Shaft
QU40292 Support Bearing
Dodge & Ram Shop Manuals

Applications:
Dodge Ram:
Ram 2500: 1994, 1995, 1996, 1997 with Dana 60 Front Axle
Ram 2500: 1998, 1999
Ram 3500: 1994, 1995, 1996, 1997, 1998, 1999