QA40299U Used Cast Iron Fork

QA40299U Used Cast Iron Fork for Dodge Dana 44 and Dana 60 with Central Axle Disconnect. Includes new Fork Pads. Limited to stock on hand.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Locations
Replaced
Applications

Tech Note 1: Locations
There are two places where you might find wear on your original Fork. The most common and obvious area to find wear is at the tips. When the plastic shift pads wear out or break off, the friction between the soft iron Fork and hardened steel shift collar will grind down the fork tips. Less common, and often overlooked as a cause of shifting problems is wear in the hole the actuator rod fits through. Vibration from rough roads, can, over time wear the hole oversize. The oversize hole permits the shift Fork to cock under load which also puts uneven pressure on the Sliding Collar. Result: erratic shift performance.

Tech Note 2: Replaced
Dana has discontinued the Cast Iron Fork & replaced it with the QA4628 Aluminum Fork.

Applications

DODGE:
Ramcharger, W150: 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993
W-250 with Gasoline engine: 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993
Ram 1500: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Ram 2500, Ram 3500: 1994, 1995, 1996, 1997, 1998, 1999

JEEP:
XJ Cherokee, XJ Wagoneer, Briarwood with CAD: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996
Wrangler YJ with CAD: 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996
MJ Comanche with CAD: 1986, 1987, 1988, 1989, 1990, 1991, 1992