QU20328U Used Left Rear Axle Shaft for most 1999-2010 Ford Sterling 10.5"

QU20328U Good Used Left Rear Axle Shaft For most 1999-2010 Ford Sterling 10-1/2" full-floating rear axles in Excursions, F250, and F350 single rear wheel trucks. These good used Left (drivers side in North America) 35 spline Axle Shafts are taken from axle assemblies our Research and Development Department had for part verification and tool design purposes. Available while supplies last.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Measure
Matching Parts
Applications

Tech Note 1: Measure
QU20328U Length from inside face of flange to end is approximately 37-3/16". To verify the length of the shaft you need measure from the inside face of the flange to the tip of the splined end.

Tech Note 2: Matching Parts
Matching Parts for QU20328 Axle Shafts:
QU20004 O-Ring to Seal between the axle shaft and wheel hub
QU20329 Bolt, Axle Shaft to Hub (Metric, fits 2003-2005)
QU20237U Right Axle Shaft
QK4019 Spindle Nut Kit
TK8332 and TK8333 Rear Wheel Bearing Kits
QU20324 Rear Wheel Hub 1999-2004 Super Duty, 2000-2005 Excursion

Applications
Ford:
F-250 Super Duty (verify length of your old shaft): 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
F350 Super Duty with Single Rear Wheels (verify length of your old shaft): 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Excursion (verify length of your old shaft): 2000, 2001, 2002, 2003, 2004, 2005