QU52175 5/8" SRW Front Wheel Stud for 1969-1989 Dodge 4x4 1 Ton Trucks

QU52175 5/8-18 SRW Right Hand Serrated Front Wheel Stud for most 1969-1973 W300 Dana 70 Front Axles plus most Single Rear Wheel 1975-1980 W300 and 1981-1989 W350 Dodge 1 ton 4x4 trucks with Dana 60 front axles. Overall Length 2-17/32".

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Safety First 
Rotor Runout
1969-1974 Dana 70 
Matching Parts 1975-1974 Dana 70 
1975-1989 (and early 1990) Dana 60 Disc Brake 
Matching Parts 1975-1989 Dana 60 
Applications

Tech Note 1: Safety First
For safety reasons, never reuse wheel bolts (studs). New wheel bolts do not cost very much and they are way cheaper than hospital or funeral bills.

Tech Note 2: Rotor Runout
It is relatively unusual for a big 4x4 brake rotor to have less than the maximum allowable runout and rotor thickness variation once it is assembled to a wheel hub. This is due to manufacturing tolerances of the parts and the pressures exerted on the hub and rotor when pressing in the wheel studs. After assembling your brake rotor to the new hub, the rotor should be checked for thickness variation (0.001" {0.025 mm} maximum) and runout (0.005" {0.127 mm} maximum with 0.003" or less preferred). A rotor that is out of tolerance should be machined with an on-the-vehicle brake lathe if possible or on an accurate bench type brake lathe.

Tech Note 3: 1969-1974 Dana 70 Drum Brake
QU52175 fits the following 1969-1974 Dodge W300 4x4 Dana 70 4x4 Front Drive Axles
1969-1971 Right Side Single or Dual Rear Wheel
1972 Right Side Dual Rear Wheel
1973 Right and Left Side Dual Rear Wheel
1974 Not Used

Tech Note 4: Matching Parts 1975-1974 Dana 70
under construction

Tech Note 5: 1975-1989 (and early 1990) Dana 60 Disc Brake
QU52175 fits the following 1975-1980 W300 and 1981-1989 W350 4x4 Dana 60 Front Drive Axles
1975-1985 Left and Right Side with Single Rear Wheels
1986-1989 Verify Stud Size. 5/8" uses QU52175. 1/2" see QU50774.
1990 Most trucks will have internally splined wheel hubs. If you have the odd 1990 with the 8 bolt Dualmatic or Selectro Hub, see the 1986-1989 information.

Tech Note 6: Matching Parts 1975-1989 Dana 60
Exploded View XV1001 1975-1989 Dodge W250, W350 Dana 60/61 Front Axle
QU40119 Wheel Seal
QU50412 Outer Wheel Bearing
QU50411 Outer Wheel Bearing Cup
QU50396 Inner Wheel Bearing Cup
QU50398 Inner Wheel Bearing
QU11453 SRW Brake Rotor
QU40293 Spindle
QU11069 Hub 1975-1989 Dodge W250HD, W350 with Single Rear Wheels
QU50216 8 Bolt Hub Gasket
QT1218 2-9/16" Hex Spindle Nut Socket

Applications

See Tech Notes 3 and 5