QU50208 Front Inner Wheel Seal

This part has been superseded by QU50101

QU50208 3/4 ton and 1 ton 4x4 Front Inner Wheel Seal is a flanged type 4x4 front inner wheel seal that fits 1960-1977 GM 3/4 ton with Dana 44 front axles, 1961-1977 Ford F-250 with Dana 44HD front axles, 1974-1977 Ford F-250 Crew Cab 4x4 trucks with the Dana 60 front drive axle, and 1974-1977.5 Jeep J20 3/4 ton 4x4s. Seal features an outer wiper lip to deflect road debris from the inner sealing lip.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Product Note
Installed
Interchangeable
Applications

Tech Note 1: Product Note
More wheel seals are wrecked from poor installation procedures than from any other cause. Use QT1506 Seal Installer with a QT1100 series driver handle to seat the seal square in the hub bore and without damage. After the seal is installed, lubricate the seal lips with clean wheel bearing grease.

Tech Note 2: Installed
The Seal is installed to the correct depth when the flange is seated against the wheel hub.

Tech Note 3: Interchangeable
QU50208 Flanged Front Wheel Seal is interchangeable with QU50101 Premium OE Type Front Wheel Seal.

Applications

Chevy and GMC:
K20, K25, K2500: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977.5

Ford:
F-250 with the Dana 44HD Closed Knuckle Front Axle: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975
F-250 Crew Cab with Dana 60 Front Axle: 1974, 1975, 1976, 1977.5
F-250 with Dana 44 Open Knuckle Front Axle: 1976, 1977.5

Jeep:
J20: 1974, 1975, 1976, 1977.5