Description
QU40842 7290 Series 16 Spline Greaseable Slip Yoke with Press On Seal is made to fit Dodge 7290 series front or rear driveshafts that have had the original slip stub replaced by an aftermarket 1-3/8" diameter, 16 spline slip stub such as our QU40740 Slip Stub for front CV driveshafts. This Yoke WILL NOT fit Dodge original equipment 1.25" 16 spline stubs!!!!!
Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes:
U-Joints
Specs
Installation
in Phase
Matching Parts
Applications
Tech Note 1: U-Joints
QU40842 Slip Yoke takes 7290 Series u-joints which are retained by internal c-clips that fit against the inside of the yoke ears. Width between the yoke ears is 2-5/8". U-Joint cup diameter is 1-1/8". Standard Duty U-Joint is QU40775. Heavy Duty U-Joint part number is TK40722.
Tech Note 2: Specs
QU40842 typically mates to 16 spline slip stubs that have 1.375" outside diameter partial length splines (spline length is usually 2.25" to 3"). The yoke measures 6-5/8" from the center of the u-joint hole to the end of the spline.
Tech Note 3: Installation
Install the press-on seal BEFORE trying to install the Slip Yoke on the splined slip stub.
Tech Note 4: In Phase
The Slip Yoke and weld Yoke at the opposite end of the tube MUST be in phase (See TM3000 Driveshaft Manual).
Product Reviews
Delivery & Returns
Shipping times are estimated in your cart.
More info can be found at the link below.
