QU40713 1330 Series 1985-1991 Dana 60, Dana 70 Pinion Yoke

QU40713 1330 Series 1985-1991 Dana 60, Dana 70 Pinion Yoke is a genuine Dana Spicer yoke that fits almost all 1970 to 1999 Dana 60, Dana 61 or Dana 70 front or rear drive axles. The Yoke is made to match universal joints made to Spicer 1330 series specifications. This Yoke is primarily used to retrofit 1985-1997 Ford F-350 Dana 60 axles that used an out of production QU20179 1330F pinion Yoke with a cone shaped deflector. Also commonly used for Chevy, Dodge, and GMC Dana 60 front axles to take 1330 series universal joints instead of the undersized stock 1310 or 7260 series front u-joints supplied as original equipment. Order QU40735 Strap and Bolt Kit to secure your universal joint to the yoke. Made in India. Special Order Part.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
29 Spline Pinion
Matching Parts
Applications

Tech Note 1: 29 Spline Pinion
QU40713 is 29 spline Dana 60, Dana 61, or Dana 70 pinion yoke made to couple with driveshaft universal joints made to Spicer 1330 specifications. A 1330 u-joint is a 1-1/16" cup diameter, external snap ring type joint that has an overall width of 3-5/8". See TK40721 and QU40774 universal joints.

Tech Note 2:  Matching Parts
Matching pinion seal is QU40097 and Pinion Nut is QU40022. See QU40356 Crush Sleeve for later model Dana 60 axles in Dodge and Ford trucks that use a collapsible spacer instead of shims to set pinion rotating preload.

Applications:  
Dana 60, Dana 61, Dana 70: 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999
F-350 Dana 60: 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997