QK3012 Dodge 7260 Series Driveshaft Slip Yoke Kit

QK3012 Dodge 7260 Series Driveshaft Slip Yoke Kit. Each kit includes QU40728 yoke with QU40795 Seal, QU40751 u-joint, QU40729 strap/bolt kit and S9978 Medium Strength Threadlocker. Use these kits if the driveshaft splines are still serviceable. Fits front, center, or rear driveshafts on all 1961-1986.5 Dodge trucks with original equipment 1¼"-16 full spline slip stubs and original slip yokes that measure 2.125" between yoke ears and use an internal c-clip type joint. USA Made.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Measure
Specs
1986 Change
Applications

Tech Note 1: Measure
By now, many of the original slip joints have been replaced with aftermarket 1-3/8"-16 spline parts. MAKE sure your slip stub has 16 full length splines with an outside diameter of 1-1/4"!

Tech Note 2: Specs
7260 Series u-joints are retained by internal c-clips that fit against the inside of the yoke ears. Width between the yoke ears is 2-1/8". U-Joint cup diameter is 1.078". Standard Duty U-Joint is QU40751. Heavy Duty U-Joint part number is QU40794.

Tech Note 3: 1986 Change
Dodge used this type of vented slip yoke with a spline seal on trucks built up to January 2, 1986 for both front and rear driveshafts. Starting with production date January 3, 1986, an unvented slip yoke with a boot was used for both front and rear driveshafts.

Applications
Dodge 7260 Series Light Truck Driveshafts from 1961 to 1986.5