TK2118 NV273D Transfer Case Master Overhaul Kit 2003-2012 Ram

TK2118 Torque King® Premium Quality Master Overhaul Kit for 2003-2012 Dodge NV273D Electric Shift Transfer Cases includes all the Bearings, Shaft Seals, O-Rings, Planetary Thrust Washers, Shift Fork Pads, Snap Rings, Oil Pump Pickup, Drive Chain, and Output Shaft Locknuts. Ball Bearings Made in Japan, Seals and most other parts USA Made or Mexico. Fits all Ram 2500, Ram 3500 NV273D Transfer Cases with SLIP YOKE TYPE Rear Output.

Our Torque King® Kits are assembled with 1st class quality parts here in Montana specifically for the Dodge versions of NV273D Electric Shift Transfer Cases. (There are no Knockoff parts in Torque King® Kits!)

See TK2121 if you have 2007-2012.5 Ram 3500, Ram 4500, Ram 5500 NV273D FIXED YOKE TYPE Rear Output

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Parts Included
No Gasket
Alternative Kits
NPG-NVG-MPT
Applications

Tech Note 1: Parts Included:
Ball Bearings: Input (QU50250), Rear Output (QU50249), Front Output (QU10906)
Needle Bearings: Input Pilot (QU10904), Front Output Rear (QU50502)
Rear Output Bushing: QU50261 Bushing
Shaft Seals: Input QU50254, Rear Output QU10930, Front Output QU80048
Other Seal: Oil Pump (QU50177)
O-Rings: Poppet (QU10800), Switch (QU10800), Oil Pump Inlet (QU10802), Shift Support (QU50674)
Shift Motor O-Rings: Motor to Support (QU50678), Shaft Inner (QU10825), Shaft Outer (QU10824)
Shift Support Shim Gasket: QU10950
Thrust Washers: Planet Front (QU10900), Planet Rear (QU10572)
Shift Fork Pads: Range (2 QU10951), Mode Center (QU10670), Mode Tip (2 QU10164)
Sprocket Snap Rings: 2003-2004 (3 QU10905), 2005-2012 (3 QU10902)
Input Snap Rings: Shaft (QU10952), Bearing (QU10907)
Mainshaft Snap Rings: Mode Hub (QU10975) Shaft (QU10908), Output Bearing (QU10909)
Front Output Snap Rings: Shaft (QU10600), Output Bearing (QU10910)
Planetary Snap Ring: QU10814
Morse® Drive Chain: QU50255
Oil Pump Pickup: QU10973
Output Nut: Front Output Nut (QU10512)
Miscellaneous: Threadlocker (S24200), RTV Sealant (QU90005)

Tech Note 2: No Gasket:
Chrysler did not use a gasket between the transmission and transfer case on 2003-on Ram trucks because the space between the two units is dry unless there is a seal failure. Consequently, we do not include a transmission to transfer case gasket with this Kit as it is not needed, but if you want to use a gasket you can. Order TK30052 Gasket which is from a GM application using the same bolt pattern as Dodge.

Tech Note 3: Alternative Kits:
TK2102 Torque King® Premium Quality Basic Bearing and Seal Kits
TK2117 Torque King® Premium Quality Complete Bearing and Seal Kit
TK2533 Torque King® Premium Quality Complete Rebuild Kit

Tech Note 4: NPG-NVG-MPT:
When Ford (1999 models) and Dodge (2003 models) first used NV271 and NV273 transfer cases, New Process Gear (NPG) of East Syracuse N.Y. was part of New Venture Gear (NVG). When NVG dissolved, NPG continued on under Chrysler. Chrysler subsequently sold the production rights to Magna, a Canadian automotive parts company. All these name changes are confusing, but the important thing to know is a specific assembly number for any 271F, 271D, 273D, and 273F transfer case is the same and uses the same replacement parts regardless if it was built by New Venture, New Process, or Magna.

Applications:
Dodge:
All Ram 2500, Ram 3500 NV273D Transfer Cases with SLIP YOKE TYPE Rear Output: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012