QU20382U Used 8 Bolt Front Wheel Hub for 1969.5-1975 Ford F250

QU20382U Used 8 Bolt Front Wheel Hub for 1969.5-1975 Ford F250 is a bare, internal spline, front wheel hub with good bearing and seal bores for 1969.5-1975 Ford F250 4x4 regular cab trucks with the standard 3300 pound Dana 44 closed knuckle front axle. QU20382U serviceable used, internal spline, front wheel hub fits your 1969-1975 regular cab Ford F250 4x4 Truck starting with 1969 Vin serial number F70001 and higher. QU20382U Hubs are from axles our Research and Development Department had for part verification and tool design purposes.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Bare Hub
Drum Brakes
Verify Hub
Lube
Use Installer
New Wheel Seal
Matching Parts
Applications

Tech Note 1: Bare Hub
QU20382U is a bare, internal spline, front wheel hub with a 8 x 6-1/2" bolt circle. The brake drum, bearing cups and wheel studs are NOT included.

Tech Note 2: Drum Brakes
All 1969.5-1975 Ford F250 4x4 trucks were built with front drum brakes. Factory disc brakes did not appear until 1976.

Tech Note 3: Verify Hub
QU20382U Hub was used by Ford on 3300 pound standard capacity Dana 44 front axles from mid 1969 to 1975. My 1964-1972 Ford Parts Book has the 1969 hub part number break point listed differently in the hub (to serial number F70000) and axle parts (to serial number F30000) sections. I believe the hub section is correct, but if your 1969 4x4 has a VIN between F30000 and F70001, you should physically verify which hub you need. The Break point is determined by the 1969 Serial or Vehicle Identification Number (VIN).
Contact us for Hub on F-250 up to VIN F30000 (3.25" Seal Bore)
VIN 30001 to F70000: Physically Identify Hub before ordering
QU20382U Hub with 3.3" Seal Bore fits 1969 Ford F250 4x4 trucks after serial number F70000 (plus all 1970-1975 Ford F250 4x4 trucks with the standard Dana 44 front axle).

Tech Note 4: Lube
Before installing your new wheel bearings, pack them with QU90018 Pyroplex® grease or other quality, disc brake rated, NLGI Grade 2 wheel bearing grease. I recommend you use QT5500 Wheel Bearing Packer to pack the bearings, but however you pack the bearings, your grease has to be clean and it MUST fill all the air spaces under the cage and between the bearing rollers.

Tech Note 5: Use Installer
To prevent damage to your hub bores and to protect the finely ground wheel bearing cup surfaces, always use specific-fit bearing cup installers to install your new bearing cups instead of a punch or other make shift methods.

Tech Note 6: New Wheel Seal
For best results, install a new wheel seal (QU90001) with QT1502 Seal Installer. QT1502 installer will not damage, ding, or bend the wheel seal and it keeps tension on the seal garter spring so the spring does not jump off the lip (a very common problem with makeshift seal installation methods).

Tech Note 7: Matching Parts
QU50447 Timken® Outer Wheel Bearing Cup
QU50448 Timken® Outer Wheel Bearing
QU50577 Timken® Inner Wheel Bearing Cup
QU50578 Timken® Inner Wheel Bearing
QU90001 Wheel Seal
TK4711F/TK4780F Premium Wheel Bearing and Seal Kits with Timken Bearings for 1969.5-1975 F250
QU20267 Front Spindle
QU56018 New, Current Production Warn® Manual Hub Set
QU56023 Vintage Used, Original Equipment Warn® Manual Hub Set
QU40598/QU40428/QU40657 Splined Hub Gears
QU40427 Chrome Hub Cap for use with Splined Hub Gear
QK4727 Round, 4 Slot Spindle Nut Kit
QU90018 Protection Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease
QT1802 Outer Wheel Bearing Cup Installer
QT1803 Inner Wheel Bearing Cup Installer
QT1502 Front Wheel Seal Installer
QT1100 Driver Handle
QT5500 Wheel Bearing Packer
QT1025 4 Lug Spindle Nut Sockets

Applications:
Ford:
F250 with Standard 3300 pound capacity Dana 44 Front Axle After Serial Number F70000: 1969
F250 with Standard 3300 pound capacity Dana 44 Closed Knuckle Front Axle: 1970, 1971, 1972, 1973, 1974, 1975