Description
QU11023 7260 Series Pinion Yoke for Chrysler 8.75" and 9.25" Rear Axles is a replacement for the original 29 spline pinion yoke that was used on most 1/2 ton pickups from late 1968 to 1993 plus Ramchargers and Traildusters with straight 6 or small block V8 engines. Inside Span of Yoke is 2-1/8". Includes factory installed Slinger. Imported.
Also see QU40729 U-Joint Strap and Bolt Kit
Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes:
U-Joint Specs
Matching Parts
Applications
Tech Note 1: U-Joint Specs
7260 series u-joints were originally made by Chrysler's (now defunct) Detroit Universal division. 7260 Series u-joints are retained by internal c-clips that fit against the inside of the yoke ears. Width between the yoke ears is 2-1/8". U-Joint cup diameter is 1.078". Standard Duty U-Joint is QU40751. Heavy Duty U-Joint part number is QU40794.
Tech Note 2: Matching Parts
Matching Parts for QU11023 Pinion Yoke:
QU11077 Crush Sleeve (Collapsible Pinion Preload Spacer)
QU11076 1974-1993 Pinion Seal
QU50598 Pinion Nut
QU40729 Strap and Bolt Kit for 1974-1993 QU11023 7260 Series Pinion Yoke.
QU50604 Outer Pinion Bearing Cup
QU50605 Outer Pinion Bearing
Applications
Chrysler 8.75" Rear Axle with Removable Carrier: Late 1968, 1969, 1970, 1971, 1972, 1973, 1974
Chrysler 9.25" Rear Axle: 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993
Warranty
Product Reviews
Delivery & Returns
Shipping times are estimated in your cart.
More info can be found at the link below.
