Tools 1967-1972 GM Dana 60 Rear

QT1100 1" x 8" Standard Duty Installer Driver Handle with 5/8" Tip and knurled hand grip is used with QT1500 series Seal Installers and QT1800 series Bearing Cup Installers with 5/8" center holes. QT1100 will become one of the most used tools in...

QT1804 Front or Rear Inner Wheel Bearing Cup Installer for installing QU50396, QU50413, QU50623, and QU50735 Bearing Cups or similar 3-13-16" approximate outside diameter inner wheel bearing cups in many 3/4 and 1-ton wheel hubs. Precision CNC machined...

QT2005 1-5/8" Capacity Bearing Installer and NV4500 Input Seal Installer for Transmissions and Axles This is our most popular Pinion and Transmission Bearing Installer. QT2005 was originally designed to install the Input Bearings, Countershaft Rear...

QT1116 8" Pro Duty Installer Driver Handle with knurled hand grip are used with QT1500 series Seal Installers and QT1800 series Bearing Cup Installers with 5/8'" center holes. Black Oxide finish. 1.25" diameter x 8" usable length for general purpose...

QT5500 Wheel Bearing Packer with Cover takes the mess out of packing wheel bearings, plus it minimizes the chances of getting contaminants mixed with your wheel bearing grease. I have been using mine for many, many years! The QT5500 Bearing Packer does...

QT1101 14" Standard Duty Installer Driver Handle with knurled hand grip are used with QT1500 series Seal Installers and QT1800 series Bearing Cup Installers with 5/8'" center holes. 1" diameter x 14" usable length for deep seated seals and bearings...

QT1119 14" Pro Duty Installer Driver Handle with knurled hand grip are used QT1500 series Seal Installers and QT1800 series Bearing Cup Installers with 5/8'" center holes. 1.25" diameter x 14" usable length for deep seated seals and bearings. Made in...

QT1032 USA Made Dana 25-Dana 80 Differential Case Spreader for Dana-Spicer Axles Dana Axles are designed to have a differential bearing preload of .010"-.015". With our Case Spreader, removing and installing front and rear differentials on your 4x4 is...

QT1812 Outer Pinion Bearing Cup Installer is used to install many of the Bearing Cups used in Chevy, Dodge, Ford, GMC, and Jeep SUV's, 1/2, 3/4 and 1 ton trucks from 1942 to current. QT1812 fits our QU50400 (Dana Axle Outer Pinion), QU50539 (Inner or...

QT1088 Press Step Plate for Differentials for Dana 60, Dana 70, Dana 70HD, Dana 80, Ford 10.25", Ford 10.5", GM 14 bolt axles is used when pulling and/or installing your differential bearings. These plates fit in the axle shaft hole of your...

QT1158 Differential Bearing Installer for all 2003-current AAM 10.5" Dodge Ram 2500 rear axles, all 1973-current AAM/GM 14 bolt, 10.5" ring gear rear axles, all Dana-Spicer Model 60 and 61 front or rear axles, plus all standard Model 70 axles that use...

QT1805 3-1/2" Wheel and Pinion Bearing Cup Installer is used to install many of the Bearing Cups used in Chevy, Dodge, Ford, GMC, International, and Jeep 3/4 and 1 ton trucks from 1954 to current. Use QT1805 for QU50406, QU50570, QU50606, (inner...