Spindles 1966-1971 Ford Dana 30 Front Axle

QK4727 4 Slot Dana 30, Dana 44, GM 10 Bolt Front Spindle Nut Kit includes one each genuine original equipment QU40004 Inner Spindle Nut, QU40060 Spindle Nut Lock Washer, and QU40031 Outer Spindle Nut which fit many Dana 30 (Ford Bronco) Dana 44 (All...

QU40232 Early Type Brass Axle Shaft Thrust Washer measure just under 1.875" outside diameter. This thrust washer was used on most 1967-1972 4x4's with open knuckle front axles plus a few models from all manufacturers as late as 1974. It is also found on...

QT1012i Value 4 Lug 4x4 Front Spindle Nut Socket is a durable, 1/2" drive special socket that fits 4 slot spindle nuts used on many axles from the late 1950's to 1996 including Dana 28IFS, Dana 30, Dana 35IFS, Dana 44, Dana 44IFS, Dana 60, and GM 10...

QU40043 Early Type Dana Front Axle Spindle to Axle Shaft Seal fits 1967-1974 Dana 30 and Dana 44 axles with QU40324 2" outside diameter Spindle Slinger. This one piece Seal was used on most 1967-1972 4x4's with open knuckle front axles plus a few models...

QU40004 4x4 Front, 4 Slot Inner Spindle Nut with Pin is a genuine original equipment part for many Dana 30 (Ford Bronco) Dana 44 (All Makes), GM 10 Bolt (Chevy/GMC) and 1973-1977 Ford F-250 Crew Cab Dana 60 closed knuckle front drive axles. This nut was...

QU40060 Round Spindle Lock Washer for Dana 28IFS, Dana 30, Dana 35IFS, Dana 44 (All Makes), Dana 44IFS, 1973-1977 Ford F-250 Crew Cab Dana 60 front drive axles, and GM 10 (Chevy/GM) Bolt Front Axles. This washer was used between the inner and outer...

QK4734 Front Axle Shaft Spindle Bearing Set fits late 1960's to 1990's Dana 30, Dana 44, and GM 10 Bolt front axles, plus 1976-1977 Ford F-250 crew Cab Dana 60 axles. One bearing is pressed into each spindle to support the outer axle shaft. USA Made...

QU40031 Outer 4 Slot 4x4 Front Spindle Nut is a genuine Dana-Spicer original equipment part for Dana 30 (Ford Bronco) Dana 44 (All Makes), GM 10 Bolt (Chevy/GMC) and 1973-1977 Ford F-250 Crew Cab Dana 60 front drive axles. This 1-5/8" thread nut was used...

QA4727U Good Used 4 Slot Front Spindle Nut Kit includes one each QU40004U Inner Spindle Nut, QU40060U Spindle Nut Lock Washer, and QU40031U Outer Spindle Nut which fit many Dana 30 (Ford Bronco) Dana 44 (All Makes), GM 10 Bolt (Chevy/GMC), and 1974-1977...

Replaced by TKA40630 Dana 44 Front Spindle Kit QU40630 Dana 44 BARE Front Spindle for Open Knuckle, Drum Brake Axles is a new replacement Front Axle Wheel Bearing Bare Spindle for front Drum Brake equipped Dana 44 front drive axles in 1966-1972 Ford...

QU40004U Good Used 4x4 Front Inner Spindle Nut with Pin is a good used genuine original equipment part for many Dana 30 (Ford Bronco) Dana 44 (All Makes), GM 10 Bolt (Chevy/GMC) and 1973-1977 Ford F-250 Crew Cab Dana 60 closed knuckle front drive axles...

QU40060U Good Used Round Spindle Lock Washer for Dana 28IFS, Dana 30, Dana 35IFS, Dana 44 (All Makes), Dana 44IFS, 1973-1977 Ford F-250 Crew Cab Dana 60 front drive axles, and GM 10 (Chevy/GM) Bolt Front Axles. This washer was used between the inner and...