Small Parts, Dana 60 Front Axle 99-04 Ford

QU20081 Hub Stud to Knuckle Flanged Nut for 2005-current Ford Super Duty is a genuine original equipment replacement part for securing the wheel hub to the steering knuckle on 4x4 Ford Excursion SUVs and 1999-2020 Ford F250, F-350, F-450, and F-550 4x4...

QU40086 Dana 60, Dana 70 Genuine Dana-Spicer Grade 9 Ring Gear Bolt has locking teeth under the hex head to prevent loosening under any load conditions. QU40086 is an exact fit, genuine Dana-Spicer replacement part for most Dana 60, Dana 61, Dana 70, and...

QU40343 Differential Cap Bolt with 3/4" hex head for almost all Dana 44, 50, 60, 61, 70, 70HD, and 80 Front and Rear Drive Axles. Long shoulder, hardened, Grade 8 bolt is a genuine Dana-Spicer original equipment part. Use to replace any broken,...

QU20366 Ford  Steering Knuckle Vacuum Fitting for Vacuum Hub Locks fits the steering knuckles on Ford Excursion and 1999-up Ford Super Duty F250, F350, F450, F550 4x4 Trucks. QU20366 is a bare Fitting for auto hub applications and does not...

QU40022 Dana 60, Dana 70 Pinion Nut Genuine Dana-Spicer all-metal, prevailing torque type lock nut is the original equipment replacement part for most Dana-Spicer Model 60, 61, 70, and 70HD front and rear axles. Use 1-5/16" socket. Country of origin...

QU20053 Caliper Anchor Plate to Steering Knuckle Bolt with factory applied threadlocker is a genuine original equipment part, plated for corrosion protection, for 1995-1997 Ford F250, F350, 2000-2005 Ford Excursion and 1999 to 2016 Ford Super Duty®...

QU40356 Dana 60 Pinion Preload Spacer (Crush Sleeve) for many 1994-2016 Dana-Spicer 60 Front and Rear Axles. Starting with the 1994 model year Dodge Ram trucks, Dana-Spicer Model 60 axles switched from using selective fit shims to the QU40356 collapsible...

QU40023 Dana 60, Dana 70 Hardened Pinion Flat Washer Genuine Dana-Spicer pinion flat washer is the original equipment replacement part for most Dana-Spicer Model 60, 61, 70, and 70HD front and rear axles. Also fits 2007-2018 Jeep Wrangler JK Rubicon and...

QU20999 Nut, Special Metric Grade 12 Front Hub to Front Wheel Extension or Spacer for 1999-current F350, F450, F550 with 14mm Coarse Thread Front Wheel Studs. Sold individually.

QU40030 Inner Pinion Cup Oil Baffle for Dana 60, Dana 61, and Dana 70U Axles is a genuine original equipment Dana Spicer replacement part. On selected axles (mostly Fords with reverse spiral pinions), this baffle fits between the 3-1/2" OD inner pinion...

D441750 3/8" x 3/4" Coarse Thread Flange Head Bolt for Automotive Applications including 1999-up Dana 50 and Dana 60 Front Axles. Sold individually. Also See: D441750U Used 3/8" x 3/4" Coarse Thread Flange Head Bolt available while supplies last. Need...

QU40099 Outer Pinion Slinger for Dana Model 60, 61 and 70 Axles is a genuine Dana Spicer original equipment part that fits between the outer pinion bearing and pinion yoke. Also fits 2007-2018 Jeep Wrangler JK with Dana Super 44 rear axles. USA Made...