QU20247U Used Front Axle Pinion Yoke for 1999-2005 Ford Dana 50

QU20247U Used 1999-2005 Ford Dana 50 Front Axle Pinion Yoke (available while supplies last) is a genuine original equipment part for Ford Excursions and 1999-2002 Dana 50 equipped F350 single rear wheel and F250 Ford Super Duty 4x4s. These 26 spline pinion yokes match the 1350 series front driveshaft u-joints on your big Ford.

Also available new: QU20247 Dana 50 Pinion Yoke

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
U-Joint
Seal
When Replacing
Lubricate
Matching Parts
Applications

Tech Note 1: U-Joint
QU20247 Pinion Yoke accepts external snap ring universal joints made to Spicer 1350 series specifications with 1-3/8" diameter cups and an overall width of 3-5/8". Use with TK40719 or QU40731 universal joints.

Tech Note 2: Seal
1999-2005 Ford Dana 50 Pinion Yokes do not have a metal slinger to protect the seal, instead QU40405 Outer Wiper V-Seal is used.

Tech Note 3: When Replacing
When replacing your pinion yoke, you should, as a minimum, replace the 2 pinion seals, crush sleeve, and pinion nut.

Tech Note 4: Lubricate
To provide initial lubrication for the seal, put a film of clean grease on both the pinion yoke hub and seal lips.

Tech Note 5: Matching Parts
QU40570 Dana OE Pinion Seal (1999-2000.5)
QU40411 Dana OE Flanged, Deep Shell Pinion Seal (2000.5-2005)
QU40405 Dana OE Pinion Outer Wiper V-Seal (1999-2005)
QU40009 Dana OE Pinion Nut
QU40010 Dana OE Pinion Yoke Washer
QU40002 Dana OE Outer Pinion Bearing Slinger (fits between bearing and yoke)
TK40719 or QU40731 universal joints
Dana 50 Ring and Pinion Sets

Applications:
Ford:
F250, F350SRW (partial after 1999): 1999, 2000, 2001, 2002
Excursion: 2000, 2001, 2002, 2003, 2004, 2005