QU50071 Morse OEM Transfer Case Drive Chain

QU50071 Transfer Case Drive Chain 1-1/4" wide Genuine Morse HY-VO™, USA made, original equipment transfer case drive chain fits all 1994 to 2002 New Process NP241DLD Transfer Cases in Dodge Ram 2500 and Ram 3500 4x4 trucks. Also in Dodge NP243D Transfer Cases, 1981-1988 Chevy Blazer, GMC Jimmy plus Chevy/GMC 1/2 ton and 3/4 ton 4x4 trucks with the original New Process NP208C Aluminum Chain Drive Transfer Case and many 1998 and newer Chevy and GMC New Process NP241C, and in NP243C Transfer Cases. QU50071 in Chevy and GMC Borg Warner 1370 and 4401 Transfer Cases, and in Jeep NP208J Transfer Cases. USA Made.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Common Myth
NP241DLD
Use Correct Chains
Matching Parts for 1994-2002 Dodge NP241DLD
Matching Parts-Saved for Future Use
Matching Parts-Saved for Future Use
Matching Parts-Saved for Future Use
Matching Parts-Saved for Future Use
Applications

Tech Note 1: Common Myth
Contrary to popular belief, the Drive Chain can not cause a clunk or contribute to "slack" in the drive train in 4x2 mode. The chain is only under power in 4x4 mode. Except for late 2002 trucks that did not have the vacuum controlled Central Axle Disconnect (CAD) system, the chain does not even move in 4x2 mode as the chain and the front differential are disconnected.

Tech Note 2: NP241DLD
NP241DLD transfer cases were standard on 1994-2002 Ram 2500 4x4 trucks. This model of transfer case was not used for any other application.

Tech Note 3: Use Correct Chains
In addition to having the correct length, width, and link height, a replacement transfer case drive chain must have the same type of link pins as the original equipment chain. Why? Because transfer case sprocket teeth are machined with specific features and angles that match a specific link and pin type. Our QU50071 chains exactly match the original equipment specifications because they ARE original equipment chains.

Tech Note 4: Matching Parts for 1994-2002 Dodge NP241DLD
Exploded View XV4002 1994-1997 Dodge Ram NP241DLD Transfer Case
Exploded View XV4004 1998-2002 Dodge Ram NP241DLD Transfer Case
Mopar® 68218057AB ATF+4 Transfer Case Fluid, Requires 2.31 Quarts to Fill

Rear Output:
QU10872 Synchro Hub to Mainshaft Snap Ring
QU10820 Synchro Strut Tension Spring
QU11166 Synchro Hub
QU10821 Synchro Strut
QU50354 Synchro Sleeve
QU10819 Synchro Ring
QU50355 Upper Chain Drive Sprocket
QU50603 Rear Output Mainshaft
QU50177 Oil Pump Seal
QU50423 Oil Pump
QU50875 Rear Output Bearing
QU10816 Snap Ring
QK2069 Transfer Case Saver Kit
QU40813 Rear Output Slip Yoke
Front Output:
QU10512 Front Output Flange Lock Nut
TK10513 Splined Yoke Seal
QU10806 Grade 8 Bolt
QU10885 Front CV Flange Yoke
QU10639 Slinger/Wear Sleeve
QU10801 Front Output Seal with Wiper
QU50875 Front Output Bearing
QU10874 Front Output Bearing Snap Ring
QU50505 Front Output Shaft
QU50513 Lower Driven Sprocket
QU10818 Front Output Sprocket Snap Ring
QU50502 Front Output Rear Needle Bearing

Tech Note 5: Matching Parts
Saved for Future Use

Tech Note 6: Matching Parts
Saved for Future Use

Tech Note 7: Matching Parts
Saved for Future Use

Tech Note 8: Matching Parts
Saved for Future Use

Applications

Chevy/GMC:
Blazer, Jimmy, 1/2 ton, 3/4 ton 4x4 trucks with the original New Process NP208C: 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988
NP241C, NP243C Transfer Cases
Borg Warner 1370 and 4401 Transfer Cases

Dodge Ram 2500, Ram 3500 4x4 trucks:
New Process NP241DLD and NP243D Transfer Cases: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002

Jeep:
New Process NP208J Transfer Cases