QT3004 Clutch Alignment Tool for Dodge 1-1/4" 10 Spine Clutch Discs

QT3004 Clutch Alignment Tool for Dodge 1-1/4" 10 Spine Clutch Discs is an essential tool when installing a clutch in a Dodge Ram Cummins Diesel or gas V10 truck to center the clutch hub to the pilot bearing and crankshaft center line. USA Made.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Tightening Pressure Plate Bolts
Matching Parts
1-3/8" Clutch Spline
Applications
1994-2002 Clutch Service Video

Tech Note 1: Tightening Pressure Plate Bolts
As you tighten down the pressure plate bolts, check the alignment tool to ensure it will slide freely in the pilot bearing. Just pull back on the tool 1/4" or so and then push it back in. If the tool gets tight or jams, it is an indication that the disc is a little off center. A disc that is not centered will make transmission installation a whole lot harder!

Tech Note 2: Matching Parts
Related Parts and Tools for QT3004 Clutch Line Up Tool:
QU10523 Clutch Release Fork for 1989-1993 Cummins Diesel
QU10565 Clutch Release Fork for 1994-up Cummins Diesel
QU51002 Clutch Release Bearing Assembly for 1989-up Cummins Diesel
QU10558 Stock Needle Pilot Bearing for 1994-up Cummins Diesel
QU51010 Upgrade Ball Pilot Bearing for 1989-up Cummins Diesel
QK6007 Clutch Pivot Ball Kit for 1989-1993 Cummins Diesel
QK6005 Clutch Pivot Ball Kit for 1994-up Cummins Diesel
QK6008 Clutch Cover Bolt Kit for 1989-1993 with Sachs 13" original equipment type clutch
QK6010 Clutch Cover Bolt Kit for 1994-2004 5 Speed and 1999-2000 6 Speed (12.4" Clutch)
QK6009 Flywheel Bolt and Washer Kit for 1989-2005.5
QK6000 Rear Crank Seal Kit for Cummins Diesel Engine
QT3001 Barring Tool for Dodge Cummins Diesel

Tech Note 3: 1-3/8" Clutch Spline
Need a Clutch Alignment Tool for a Dodge Diesel with 1-3/8" clutch spline? See QT3016.

Applications

Dodge Ram with Cummins Diesel and Stock Clutch Spline size:
Getrag G360 5 Speed: 1989, 1990, 1991, 1992, 1993
New Venture NV4500HD 5 Speed: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
New Venture NV5600 6 Speed: 1999, 2000

Dodge Ram with V-10 Gasoline Engine:
New Venture NV4500HD 5 Speed: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004

1994-2002 ClutchService Video