QU20013 Park Brake Lever Washer

QU20013 Park Brake Lever Washer for 1972-1993 Dodge and 1968-1997 Ford 3/4 and 1 ton trucks equipped with Dana full float rear axles mounting 2" to 3/5" wide Bendix 12" diameter drum brakes. USA Made.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Other Common Wear Parts 
Locknuts and Bolts
Matching Parts
Applications

Tech Note 1: Other Common Wear Parts
Other common wear parts on 12" Bendix parking brake systems are QU20055 Pivot Bolt, QU20012 Spring, QU20015 Bushing, and QU95033 Locknut. Need all of these common wear parts? Order QK7004 Parking Brake Replacement Small Parts Kit.

Tech Note 2: Locknuts and Bolts
To replace the wheel cylinders on these Bendix 12" brake systems, you have to remove the Park Brake Lever from the backing plate. To do this, you take off QU95033 Locknut and drive or pry QU20055 Pivot Bolt from the backing plate. Since both parts were designed as single use components, they should be replaced for maximum retention and safety.

Tech Note 3: Matching Parts
QU20012 Park Brake Lever Spring
QU20015 Park Brake Lever Pivot Bushing
QU20055 Parking Brake Lever Pivot Bolt
QU95033 1/4" Locknut
QU40290 ABS Tone Ring

Exploded View XV2011 2000-2002 Dodge Ram 2500, Ram 3500 Dana 80 Rear Axle

Applications

Dodge:
Dodge 3/4 ton and 1 ton trucks with Bendix 12"x2". 12"x2.5". or 12"x3" Rear Brake Systems: 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993

Ford:
Ford 3/4 ton and 1 ton trucks with Bendix 12"x2". 12"x2.5". or 12"x3" Rear Brake Systems: 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997