XV2011 Dan the Gear Man® Exploded View
2000-2002 Dodge Dana 80 Full Floating Rear Axle
2000-2002 Dodge Dana 80 Full Floating Rear Axle

Kits:
TK4778 Premium Differential Overhaul Kit
QK4008 Stock Rear Spindle Nut Kit
with Socket
Without Socket: QK4009
TK4011 Spindle Nut Upgrade Kit with Socket
Without Socket: TK4012
TK4987 DRW Bearing, Seal, Spindle Nut Kit
TK8373 Spindle Nut Upgrade Kit with Rounded Hex Nuts and Socket
Without Socket: TK8374
TK8359 Master SRW Wheel Bearing, Seal, & Tool Kit
(Flanged Seals)
TK8307 Master DRW Wheel Bearing, Seal,
& Tool Kit
Without Tools: TK8324
TK4986 SRW Bearing, Seal, Spindle Nut Kit
Page 19 of 19


;Resize,width=480)



;Resize,width=480)

;Resize,width=480)
TK8308 Master SRW Wheel Bearing, Seal, & Tool Kit
(Flangeless Seals)
Introduction >
User Guide >
XV200 2000-2001 SRW Hub w/Drum Brakes >
XV201 2000-2001 DRW Hub w/Drum Brakes >
XV202 2001-2002 SRW Hub w/Disk Brakes >
XV203 2001-2002 DRW Hub w/Disc Brakes >
XV204 2000-2001 Drum Brakes >
XV205 2001-2002 Disc Brakes >
XV206 Differential And Pinion >
Pinion Seal and Dana Ring & Pinion Set Parts Selector >
Ring and Pinion Sets >
XV207 Dana OEM Differential Cases And Parts >
XV208 Dana OEM Limited Slip Differential Cases and Parts >
Aftermarket Differential Cases >
XV209 2000-2002 Housing & Hardware >
More Resources >
You May Also Need >
Kits >
2000-2002 Dodge Dana 80 Full Floating Rear Axle Exploded View Scene Index

Page 1 of 19
2000-2002 Dodge Dana 80 Rear Axle Introduction
The Dana-Spicer Model 80 Single Speed, Hypoid Gear, Full-Floating Rear Axle was first introduced in Dodge Ram trucks in the 1994 model year. For the 2000-2002 model years, Dodge used the Dana 80 rear axle for all Ram 2500 models with either a Cummins Diesel or V10 gas engine and a manual transmission. All 2000-2002 Ram 3500 trucks use the Dana 80 rear axle.
Drum Brakes are found on all 2000 and early production 2001 trucks. Rear Disc Brakes were introduced as a running change during the 2001 model year and are found on all 2002 axles.
Two different, non-interchangeable pinion oil seals were used in 2000-2002 Dodge Dana 80 rear axles. 2001-2001.5 axles have a shallow shell pinion seal 2001.5-2002 axles use a deep shell, flanged case seal. A separate, rubber V-Seal is used with both seal designs between the pinion yoke slinger and the pinion seal to protect the oil seal from dust and debris.
2002 was the last year Dodge used a Dana 80 rear axle in Ram trucks. It was replaced by the AAM 11.5" Rear Axle effective with the 2003 model year.
Page 2 of 19
Previous
Next