XV1011 Dan the Gear Man® Exploded View
1995-1997 Ford F350 Dana 60 Front Axle
1995-1997 Ford F350 Dana 60 Front Axle
Popular Kits for 1995-1997 F350 Dana 60 Front Axles
QK4591 NG Ball Joint Kit
TK4201 Front Hub & Rotor Kit
QU50491 Diff Bearing & Seal Kit
QU20087 Auto Hub Service Kit
TK4995 Front Wheel Hub Kit
QU56011 Warn 11690 Hub Locks
QU40420 Front Spindle Kit
TK4738 Front Wheel Bearing, Seal, & Tool Kit
Page 23 of 23
XV1011 Exploded View
Scene Index
Introduction >
User Guide >
XV103S SRW Wheel Hub >
XV103D DRW Wheel Hub >
XV161 Axle Shafts & Spindles >
XV162 Knuckle & Ball Joint >
XV163 Differential >
XV163 Differential >
XV120 Brakes >
XV114 Auto Hub >
XV115B Manual Hub >
XV106B Warn Hub >
Axle Universal Joint Selector >
Ring and Pinion Set Selector, Dana OE >
Ring and Pinion Set Selector, Yukon Replacement >
Differential Case Selector, Open >
Differential Case Selector, Limited Slip >
Differential Case Selector, Air & Electric >
Differential Case Selector, Mechanical >
More Resources >
Recommended Axle Maintenance >
You May Also Need >
Kits >
Page 1 of 23
1995-1997 F350 Dana 60 Front Axle Introduction
The open knuckle, monobeam, Dana-Spicer Model 60 using Ball Joints instead of King Pins was introduced by Ford for the 1992 model year F-350 1 ton 4x4. The new axle, which is rated for a 5,000-pound capacity was the first production Dana 60 front axle to use Ball Joints, but it still had serviceable wheel bearings and lockout hubs like the previous 1985-1991 King Pin axle. Ford used the axle through the end of the 1997 model year when the F-350 line was dropped and replaced by the 1999 F-350 Super Duty which initially only had a Dana 50 MonoBeam front Axle.
1995 Bill of Material Numbers: 610460
1996-1997 Bill of Material Numbers: 610610, 610741
1998 Bill of Material Numbers: 1997 was the last Model year in U.S.A. for this body style F-350, however, production continued until the 1999 F-350 Super Duty was released in early 1998. A 1997 model year F-350 built in 1998 should have BOM number 610741.
1996-1997 Bill of Material Numbers: 610610, 610741
1998 Bill of Material Numbers: 1997 was the last Model year in U.S.A. for this body style F-350, however, production continued until the 1999 F-350 Super Duty was released in early 1998. A 1997 model year F-350 built in 1998 should have BOM number 610741.
1995-1997 Ford F-350 Dana 60 front axles have a unique to Ford, reverse spiral ring and pinion set available in either 3.54 or 4.10 gear ratios. The reverse spiral gear sets are not interchangeable with standard gear sets.
Page 2 of 23
Previous
Next