QA40593 Dana 44 Front Spindle Kit for GM & Jeep 1971-1977.5

QA40593 NEW 1/2 ton Dana 44 Front Spindle Kit for 1971-1977.5 Chevy, GMC and 1974-1977.5 Jeep 1/2 ton 4x4s with Disc Brakes is a genuine original equipment Dana-Spicer replacement part for disc brake equipped 1971-1977.5 Chevy K5 Blazer, K10 and GMC Jimmy, K15/K1500 4x4s and 1974-1977.5 Jeep J10, Cherokee, and Wagoneer. Includes V-Seals and factory installed Spindle Needle Bearing. See Tech Note 1 for information about using this spindle on 1971 or 1972 model year axles. Kit includes Spindle, QK4734.5 spindle bearing (installed), QU40070 spindle thrust washer, QU40056 small spindle seal, and QU40071 large spindle seal. Extend the life of your classic GM 4x4 by replacing your worn or bent spindle while they are still available! Imported.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
1971 & 1972 Axles
Verify 1977 Inner Wheel Bearing Cup Size
Grease
Matching Parts
Applications

Tech Note 1: 1971 & 1972 Axles
All 1971 and most 1972 1/2 ton GM Dana 44 front axles use a 2" outside diameter slinger on the outer axle shaft. QU40071 large spindle V-Seal that comes with QA40593 Spindle is made for the 2-1/4" diameter slinger found on late 1972 and newer outer axle shafts. To use QA40593 spindle on your 1971-1972 axle with a 2" outside diameter outer axle shaft slinger, you MUST replace the large V-Seal with QU40043 one-piece spindle seal and replace the plastic thrust washer with QU40232 bronze thrust washer.

Tech Note 2: Verify 1977 Inner Wheel Bearing Cup Size
QA40593 Spindles were used from 1971 to early 1977 on GM 1/2 ton Dana 44 front axles. The matching inner wheel bearing has an inside diameter of 1-25/32". Most 1977, 1/2 ton GM 4x4s with Dana 44 front axles used QU40313 spindles and use 2" inside diameter inner wheel bearings. If you have a 1977 axle, verify the inner wheel bearing size!

Tech Note 3: Grease
Before installing your new spindle, lube the bearing, seals, and thrust washer with QU90018 Pyroplex® grease. Also, apply some Anti-Seize Compound to the mating surfaces between the spindle and steering knuckle.

Tech Note 4: Matching Parts
QU40683U Used Bare Replacement Spindle
Y440593 Replacement Spindle
QU50750 Spindle Mounting Stud 1971-1972
QU40054 Spindle Mounting Stud 1973-1977
QU30188U Used 6 Bolt Wheel Hub for 1971-1977.5 Blazer, Jimmy, 1/2 ton Suburban and truck
TK4714/TK4742 Wheel Bearing Kits with Timken® Bearings
QU50447 Timken® Outer Wheel Bearing Cup
QU50448 Timken® Outer Wheel Bearing
QU50577 Timken® Inner Wheel Bearing Cup
QU50578 Timken® Inner Wheel Bearing
QU50091 Wheel Seal
QU40228 Spindle Bearing and Seal Kit for QU40683U when used on late 1972 to 1977.5 Axles
QU40043 One-Piece Spindle Seal for 1971 and most 1972 (Your Outer Axle Slinger OD will be 2")
QU40232 Bronze Thrust Washer for 1971 and most 1972 (Your Outer Axle Slinger OD will be 2")
QK4727 Round, 4 Slot Spindle Nut Kit
QU40669 Outer Axle Shaft for 1971 and most 1972 (u-joint cup diameter is 1-1/16")
QU40221 Outer Axle Shaft for late 1972 to 1977.5 (u-joint cup diameter is 1-3/16")
QU90018 Protection Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease
QT5500 Wheel Bearing Packer
QT1025 4 Lug Spindle Nut Socket

Applications:
Chevy and GMC:
K5 Blazer, Jimmy, K10, K15, K1500 1/2 ton 4x4 Suburban and Trucks: Late 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1977.5

Jeep:
Wagoneer, Cherokee, J10 Truck: 1974, 1975, 1976, 1977, 1977.5