QU10892 0.097" Shaft Snap Ring for NPG Transfer Cases

QU10892 0.097” Thick Input Shaft Snap Ring for New Process NP205 Direct Mount Gear Drive Transfer Cases with Large Diameter Input Shafts Selective input shaft Snap Rings are used to secure large bore input ball bearings to Chevy/GMC 32 spline, Dodge 29 spline, and Ford 31 spline NP205 Transfer Case input shafts. To minimize input shaft end-play, the thickest Snap Ring that will naturally fit in the input shaft snap ring groove and against the installed input bearing is desired. New Process offered four Snap Ring widths (0.088" QU10599, 0.091" QU10891, 0.094" QU10893, 0.097 QU10892") for the big input versions of the NP205. Also used on GM 246 Transfer Cases. USA Made.

QU10599 0.088” Thick Selective Input Shaft Snap Ring
QU10891 0.091” Thick Selective Input Shaft Snap Ring
QU10893 0.094” Thick Input Shaft Snap Ring (also used on many GM NP246 Transfer Case)
QK2175 4 Piece Input Shaft Snap Rink Kit

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Tolerance
When Ordering
Input Ball Bearing
4x4 Tech Help Publications
QU10893
Applications

Tech Note 1: Tolerance
Thickness tolerance is +/-0.0015".

Tech Note 2: When Ordering
Most original equipment Replacement Parts for the NP205 Transfer Cases have been out of production since 1993. Our inventory of selective fit Lock Rings diminishes almost daily. If you see your desired Snap Ring is Sold Out, order the next smallest available size.

Tech Note 3: Input Ball Bearing
In most cases, the input ball bearing can be pushed into place on an NP205 input shaft. Before assembling the input shaft into the transfer case, temporarily install the bearing on the shaft and measure the exposed groove thickness.

Tech Note 4: 4x4 Tech Help Publications
Need Tech Help on rebuilding your NP205? Get my TM2000 New Process NP205 Transfer Case Service Manual. A Complete NP205 shop Manual with over 375 color photographs is your indispensable NP205 resource for Repair Procedures and Parts Identification. Complete coverage of Disassembly, Inspection, and Reassembly Procedures. Also, Shop Notes, Tool Recommendations, Complete Parts Guide, and full color Exploded Views (includes all of TM2002), including Right Drop and Left Drop Models, plus GM Specific Parts. Covers New Process NP205 Transfer Cases found in Chevrolet, Dodge, Ford, GMC, and International Harvester (IHC) 4x4 vehicles from 1969-1993.
Or my TM2002 for the Exploded Views and Parts Guide only. Fully Illustrated with dozens of crisp color photographs for EASY Parts Identification! This Manual includes 10 page Parts Identification Guide with full color Exploded Views

Tech Note 5: QU10893
The QU10893 Snap Ring was used on the Input Shaft and Front Output Shaft Front on these GM NP246 assemblies:
15753790
24240015
24240016
(list not complete)

Applications:
(Partial Listing)

Chevy and GMC:
NP203, NP205 (32 Spline Input), NP231C, NP241C, NP246

Dodge:
NP203, NP205 (29 Spline Input), NP231D, NP241D, NP241DLD, NP241DHD

Ford:
NP203 Direct Mount