Description
QK1054 Replacement Fifth Gear and Nut Kit with Tools for 1994-2004 Dodge NV4500HD 4x4 Transmission has the transmission parts and special tools you need to replace your Dodge Ram NV4500HD mainshaft fifth gear in the vehicle and by yourself. QK1054 will work on any 1994-2004 Dodge 29 spline NV4500 4x4 mainshaft. Kit includes mainshaft 5th gear, mainshaft nut set, rear output seal, mainshaft nut wrench, mainshaft wrench, 12 point socket for tailshaft housing bolts, threadlockers, and RTV sealant. Seal, Gear and Nut Set imported. Tools and Chemicals USA made.
Also see QK1055 4x4 5th Gear Kit without Tools
Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes:
Kit Includes
5th Gear Failures
Remove
NV4500 Tools
Lubricants, Sealants, Threadlockers
Matching Parts
Applications
Tech Note 1: Kit Includes
QK1054 Kit with tools is for Dodge 29 spline 4x4 NV4500HD transmissions. Kit includes:
QU10067 22 Tooth Mainshaft 5th Gear
QU10069 Mainshaft Nut Set
QT2000 1/2" Drive 29 Spline Mainshaft Holding Wrench
QT2001 1/2" Drive Mainshaft Nut Wrench
QT1020 12 point Tailshaft Housing Bolt Socket
QU10123 4x4 Transmission Rear Output Seal
QU90006 3.35 oz Ultra Black RTV Sealant
S24200 6ml Medium Strength Blue Threadlocker
S24026 High Temperature Threadlocker for Mainshaft Nut
Tech Note 2: 5th Gear Failures
Having the mainshaft nut back off, allowing the mainshaft fifth gear to move backwards and out of contact with the countershaft drive gear is a common problem in Dodge trucks with the Cummins Diesel engine and New Venture NV4500 5 speed transmission. If you had the mainshaft nut back off your NV4500 and the mainshaft splines are still in reasonably good condition, you can replace the mainshaft 5th gear without removing the transmission with one of our mainshaft nut and fifth gear kits. 5th Gear Kits are really just a stop-gap repair to buy you time. Why? Because the actual cause of your nut backing off is radial movement from inadequately supported fifth gears on factory and full spline Mainshafts working against the nut set until it loosens. If used with a mainshaft that has just had it's first failure, you may get months or years of use from one of these Kits before the nut backs off again. However, the more worn the shaft, the quicker the failure. So if you install a new gear on a used shaft that has had several previous failures, don't expect much life out of the fix! For more information, read Tech Article about 5th Gear Failures and Solutions!
Tech Note 3: Remove
To do an in-vehicle 5th gear replacement in a 4x4 truck, you need to remove the driveshafts, transfer case and transmission tailshaft housing. Removal of the transmission crossmember to gain more working room is recommended but not required. Keep the transmission supported with a suitable jack after unbolting the transmission mount.
Tech Note 4: NV4500 Tools
Need Torque Specs or Rebuild procedures? Order my 116 page, full color illustrated TM1003 NV4500 Rebuild Manual.
You will need some special tools to correctly service your NV4500 Transmission. The chart below lists our current NV4500 Special Tools for popular models.
TOOLS for SPECIFIC NV4500 MODELS |
||||||
Component | 23 Spline Dodge 4x4 NV4500LD |
29 Spline Dodge 4x4 NV4500HD |
30 Spline Dodge 4x2 NV4500LD |
31 Spline Dodge 4x2 NV4500HD |
32 Spline GM 4x4 |
35 Spline GM 4x2 |
Mainshaft Nut | QT2002 | QT2001 QT2036 |
QT2002 | QT2001 QT2036 |
QT2002 QT2028 |
1-1/2" Hex Socket |
Mainshaft Holding | NLA | QT2000 | NLA | QT2011 | N/A | N/A |
5th Gear Nut Torx® Cross Bolt |
N/A | QT9205 | N/A | QT9205 | N/A | N/A |
Output Seal Installer | N/A | QT1801 | N/A | QT2058 CALL |
Not Used | Not Used |
Tailshaft Bushing Remover and Installer | Not Used | Not Used | Not Used | QT2044 | Not Used | Not Used |
TOOLS For ALL NV4500 MODELS |
||||||
Countershaft Front Bearing Cup Installer |
QT1802 | Use with QT1101 or QT1119 Driver Handle. Also can use flat side to install Dodge 4x4 Rear Output Seal | ||||
Countershaft Front Bearing Installer | QT2004 | Can also use to press 3-4 Synchro Hub on original equipment mainshafts | ||||
Input Bearing & Countershaft Rear Bearing Installer | QT2005 | Can also use to install Input Seal | ||||
Input Bearing Cup Installer | QT1801 | Use with QT1100, QT1101, QT1116, or QT1119 Driver Handle. | ||||
Countershaft Support | QT2006 | Use to support front of countersahft when installing countershaft rear bearing | ||||
1-2 Synchronizer Support | QT2008 | Use to support 1-2 synchronizer hub during synchronizer assembly | ||||
10mm 1/2" Drive 12 Point Socket | QT1020 | USA Made Impact Socket for Factory Tailshaft Housing Bolts | ||||
Long Shank Punch for Shift Lug | QT9300 | 3/16" x 8" Shank for 5th Gear Shift Lug Roll Pin |
Tech Note 5: Lubricants, Sealants, Threadlockers
Early production NV4500 Transmissions used an anaerobic sealant (QU90003) to seal between the main case and input bearing retainer, top cover, and rear housing. Mid-production units used anaerobic sealant just on the input retainer and RTV for everything else. Later production transmissions used black RTV Sealant (QU90006 or QU90005) for everything. Either type of sealant works fine (except the PTO covers ALWAYS should be sealed with RTV), but I prefer RTV for all components. Regardless of which sealant you use, make sure excess sealant does not block the lube access hole at the top of input retainer pilot that fits into the transmission case. Also, the threaded holes in the main case for the four retainer bolts and 12 PTO bolts are open ended, so you must use new bolts with factory applied threadlocker or apply Threadlocker (S24200) to your existing bolts to prevent oil seepage past the bolt threads. See my TM1003 NV4500 Shop Manual or V1003DVD NV4500 Overhaul Video for more information.
Lubricant and Chemical List for NV4500 Transmissions
QU90020 NV4500 Manual Transmission Oil
QU90003 Anaerobic Sealant
QU90006 3.35 oz Ultra Black RTV Sealant
QU90005 0.5 oz Ultra Black RTV Sealant
S24200 6ml Threadlocker
S9978 1 gram Threadlocker
QU90003 Anaerobic Sealant
QU90006 3.35 oz Ultra Black RTV Sealant
QU90005 0.5 oz Ultra Black RTV Sealant
S24200 6ml Medium Strength Blue Threadlocker
S9978 1 gram Medium Strength Blue Threadlocker
S9979 1 gram High Strength Red Threadlocker
S24026 High Temperature Threadlocker for Mainshaft Nut
Tech Note 6: Matching Parts
Matching Parts for QK1054 NV4500HD Mainshaft 5th Gear Kit:
QA1045 Full Spline Heavy-Duty 4x4 Mainshaft Kit
QU10011 Fully Splined 4x4 Mainshaft
QU10203 Countershaft 5th Gear
QK1055 4x4 Mainshaft 5th Gear Kit without Tools
TK10519 Transmission to Transfer Case Gasket (optional 1994-2004)
QU10106 12 Point Metric Tailshaft Housing Bolt with factory applied Threadlocker
QU90020 NV4500 Manual Transmission Oil
TM1003 NV4500 Shop Manual
V1003DVD NV4500 Overhaul Video
Applications
Dodge and Ram:
Ram 2500, Ram 3500 with NV4500HD 4x4 5 Speed Manual Transmission: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Warranty
Product Reviews
-
5
Very hard to find all these items in one place. If you lose fifth gear in your NV4500HD, this kit is a must.
-
5
Parts seem to be very high quality. Gear fit very tight. Had to be pressed on. The tools make torqueing the nut simple. Only time will tell.
-
QK1054
Great kit. All the parts mated up perfectly. The only issue I had was with install and not the kit. The gear itself still needed to be pressed onto the mainshaft of the transmission. If you’re not a mechanic (like myself) be sure to have a 1/2” Fine thread bolt to thread into the mainshaft and some scrap steel and hardware to make a half assed press. I used the old gear as a sleeve over the shaft, and had some 1/2” bolts on either side of some 1/2” flat bar to press the new gear into place.
Delivery & Returns
Shipping times are estimated in your cart.
More info can be found at the link below.