TK8321 Rear Wheel Bearing and Seal Kit 1972-1993 Dodge D60HD, D70

TK8321 Torque King® Rear Wheel Bearing and Seal Kit for 1972-1993 Dodge Dana 60HD and Dana 70 Single Rear Wheel Axles features premium Timken® bearings and original equipment quality wheel seals because when it comes to rear wheel bearings and seals, only the best will do to safely support the heavy loads your truck hauls! Kit includes Inner and Outer Wheel Timken® Bearings/Bearing Cups, Inner Wheel Seals, steel Axle Shaft Flange Gaskets, and Threadlocker for the axle shaft flange bolts. This Kit fits 1972 to 1993 Dodge 4x2 and 4x4 200, 250, 300, or 350 series trucks with Single Rear Wheel, Dana 60HD and Dana 70 (SRW) Rear Drive Axles that have 2" Spindle Threads.

Also available: TK4891 Torque King® Rear Wheel Bearing Only Kit features premium Timken® Bearing and Cups Only.

For a Master Kit with Tools, see TK8304. Also available for 1979-1993 TK4984 Bearing, Seal, and Spindle Nut Kit

Available Spindle Nut Options: Do Not Reuse Your 1979-1993 Original Spindle Nuts, See Safety Note Below!
Replacement Spindle Nut Lock Washers: QU40051 (for stock hex Double Spindle Nuts used up to 1-8-1979)
Stock Spindle Nut Kits: QK4013, QK4015 (used after 1-8-1979)
Double Spindle Nut Kits: TK4000, TK4001 (for 1-8-1979 and later axles)

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
SAFETY NOTE!
Kit Components
Tools
Grease Bearings
Applications

Tech Note 1: SAFETY NOTE!
Stock Elastic Stop Spindle Nuts and Lock Wedges used on Dodge Dana 70 rear axles after approximately January 8, 1979 are designed to be installed once and only once! For safety reasons, you must discard both the nut and wedge if they are removed from the spindle for any reason. Both parts lose a percentage of their resistance of coming off when they are removed. You may hear of cases where this type of factory nut has come off while the truck was being driven. Invariably, these failures involve nuts and wedges that have been reused or improperly installed. NEVER REUSE FACTORY ELASTIC STOP SPINDLE NUTS and LOCK WEDGES!!!!!

Tech Note 2: Kit Components
2 each Timken ® Wheel Bearings/Cups: QU50411, QU50412, QU50413, QU50414
2 Inner Wheel Seals: QU40450
2 Dana 70 Axle Shaft Flange Gasket: QU40078
Plus S24200 Medium strength blue Threadlocker for the axle shaft flange bolts

Tech Note 3: Tools
Available Installation Tools to make your job easier and faster:
QT1801 Outer Wheel Bearing Cup Installer
QT1804 Inner Wheel Bearing Cup Installer
QT1500 Inner Wheel Seal Installer
QT1100 1" x 8" Driver Handle OR QT1116 1-1/4" x 8" Driver Handle
QT1009 or QT1009i 1/2" Drive Rounded Hex Spindle Nut Socket for Stock Spindle Nuts

Tech Note 4: Grease Bearings
Under operating conditions, the rear wheel bearings are bathed in oil from the differential, but they do need to be packed with grease to provide initial lubrication.

Applications:
Dodge:
D200, W200, D300 Dana 60HD Single Rear Wheel Full Float Rear Axles with 2" Spindle Threads: 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979
B300 Dana 60HD Single Rear Wheel Full Float Rear Axles with 2" Spindle Threads: 1974, 1975, 1976, 1977, 1978, 1979
D200, W200, D250, W250 Dana 70 Single Rear Wheel Axles with 2" Spindle Threads: 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993
D300, W300, D350, W350 Dana 70 Single Rear Wheel Axles with 2" Spindle Threads: 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993