QK4768U Used Ford Dana 28IFS Front Spindle Nut Kit

QK4768U Used Ford Dana 28IFS Front Spindle Nut Kit is a used genuine Dana original equipment 3 piece Spindle Nut Set for 1983-1989 Ranger Pickup and 1984-1989 Bronco II with Model 28 Axle and 23 Spline Manual Locking Hubs. USA Made. One Kit includes one each of: QU40121U Used Spindle Nut with pin, QU40282U Used Washer, QU40408U Used Spindle Nut without pin. This kit was taken off an axle we disassembled for research. Available while supplies last.

See QK4768 NEW, QU40121U Spindle Nut, or QU40282U Lock Washer.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Thread Diameter
Engaging Pin
Matching Socket
Matching Parts
Applications

Tech Note 1: Thread Diameter
QK4768 Spindle Nut Kit fits spindles with thread diameters of 38mm.

Tech Note 2: Engaging Pin
The pin that protrudes from the outboard face of QU40121U Used Inner Spindle Nut is an anti-rotation device that engages with one of the holes in QU40282U Used Spindle Lock Washer. Installing the lock washer without having the pin engage one of the holes will either break or bend the pin. Improperly installed nuts and washer sets can back off during vehicle operation and possibly cause the hub and wheel assembly to fall off which may lead to severe injury or death.

Tech Note 3: Matching Socket
Use with QT1012i or QT1025 Spindle Nut Sockets. The spindle nut tightening procedure and torque specification varies widely depending upon the year and model. Consult a factory shop manual for your vehicle.

Tech Note 4: Matching Parts
QU40121 Inner Spindle Nut
QU40282 Washer
QU40408 New Outer Spindle Nut
QU20555U Used Bare Spindle
QU40438 Spindle Bearing & Seal Kit
Ford Shop Manuals

Applications:
Ford Dana 28IFS Front Axles:
Bronco II: 1984, 1985, 1986, 1987, 1988, 1989
Ranger: 1983, 1984, 1985, 1986, 1987, 1988, 1989