QU40654U Used 1.25" Long Split Dana 44 Hub Drive Gear Spacer

QU40654U Used 1.25" Long Split Dana 44 Hub Drive Gear Spacer is a good used split Steel Spacer that fits between your outer wheel bearing and hub drive gear on many 1980's Dodge and Jeep 4x4s with Dana 44 front axles with solid drive gears. Available while supplies last.

Also See: QU40654 New 1.25" Hub Drive Gear Spacer
Also available while supplies last: QU40656U Used 1.29" Solid Tube Hub Drive Gear Spacer

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Snap Ring Groove
Function
Design Change
When Installing
Applications

Tech Note 1: Snap Ring Groove
1-1/4" long Split Steel Steel Spacer has the same function as the spring and plate, but it requires an axle shaft snap ring groove that has the back edge of the groove located about 5/8" from the end.

Tech Note 2: Function
You will mainly find these Spacers in 1985-1993 Dodge Dana 44 front axles with Central Axle Disconnect, plus some late production Jeep Wagoneer axles. The Spacer replaces BOTH QU40050 Spring and QU40035 Spring Plate used on previous models. The function of this part is to locate the hub drive gear in the proper location so the outer axle shaft will stay fully engaged with the spindle seals and thrust washer. The inboard end of the Spacer goes against the outer wheel bearing cup and the outboard end will be against the back side of the drive gear.

Tech Note 3: When Installing
Hub Gear Spacers are used with either QU40428U 7/8" wide single width drive gear OR QU40657U 7/8" wide stepped drive gear. Most applications that use these Spacers have multiple snap ring grooves cut in the outer axle shaft. You need to install the axle shaft snap ring in the groove which has it's back edge about 5/8" from the end.

Tech Note 4: Matching Parts
Matching Parts for Hub Gear Spacers:
QU40427 Chrome Hub Cap
QU40614 Axle Shaft Snap Ring
QU40428U/QU40657U 7/8" wide Splined Hub Gears
QU50447 Outer Wheel Bearing Cup
QU50448 Outer Wheel Bearing
QU56018 Warn Lockout Hub Set (Replaces all the original hub drive parts including this part)

Applications

Dodge:
W150, W250 with Dana 44 axle: 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993

Jeep:
Wagoneer (partial): 1985, 1986, 1987, 1988, 1989, 1990, 1991