QU40313U Good Used Bare Front Spindle for Dana 44

QU40313U Good Used Bare Front Spindle for 1980-1993 4x4 Dodge Dana 44 in SUVs, 1/2 ton, and 3/4 ton with Dana 44 front axles. This Spindle is a good used genuine original equipment replacement part we took off axles for R&D. Fits 1980-1993 Dodge Ramcharger, Plymouth Trailduster, Dodge W150, and Dana 44 equipped W250 4x4s. This is a Bare Spindle, you need to order separately QU40228 spindle bearing and seal kit. See Tech Note 2 for 1985-1987 Left side Spindle Info. USA Made.

See: QU40313 for New Front Spindle for Dodge Dana 44

See Y440313 Replacement Dana 44 Front Spindle for 1980-1993 Dodge with Dana 44 front axles for a low cost, yet high quality replacement part. Imported.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Before Installing
Dodge 1985-1987
GM and Jeep Wheel Bearings
1977.5-Earlier
Dodge Wheel Seals and Wheel Hubs
GM Tech Help
Dodge Standard 44 Dimensions
Matching Parts for GM
Matching Parts for Dodge
Applications

Tech Note 1: Before Installing
Before installing your new spindle, lube the bearing, seals, and thrust washer with QU90018 Pyroplex® grease. Also, apply some S9975 or S81343 Anti-Seize Compound to the mating surfaces between the spindle and steering knuckle.

Tech Note 2: Dodge 1985-1987
The dead spindle design of the 1985-1987 Dodge Dana 44 CAD front axle uses a needle bearing to support the right outer axle shaft. On 1985-1987 trucks, no spindle bearing is used on the LEFT side as the left inner axle shaft is supported next to the yoke by QU50155 Bearing. Instead of a bearing, a Seal Retainer (which is no longer available) is installed in the left spindle. The Spindle itself is the same. If you need to replace the left spindle on your 1985-1987 truck, remove the needle bearing from your new spindle and install the Seal retainer from your old spindle.

Tech Note 3: GM and Jeep Wheel Bearings
Some early 1977 1/2 ton GM and Jeep 4x4s with Dana 44 front axles used QA40593 spindle that takes smaller inner wheel bearings. QU40313 spindle is made for QU50412 inner wheel bearing which has an inside diameter of 2.00". For the 1971-1977.5 GM 1/2 ton spindle, see QA40593.

Tech Note 4: 1977.5-Earlier
Some early 1977 3/4 ton GM and Jeep J20 4x4s with Dana 44 front axles may have had a wheel hub that used six 3/8" diameter bolts to secure the lockout hub or drive flange to the wheel hub. QU40313 Spindle WILL NOT fit those early 1977 and prior 3/4 tons with the external mount hub! For the 1971-1977.5 GM and Jeep 3/4 ton spindle, see QU40323.

Tech Note 5: Dodge Wheel Seals and Wheel Hubs
Dodge used the same wheel bearings and same base spindle for all 1980-1993 Dana 44 front axles. However, different wheel seals and wheel hubs are used. 1980-1984 hubs have a 3-1/4" seal bore diameter, 1985-1993 hubs have a 3-5/16" seal bore diameter.

Tech Note 6: GM Tech Help
Need Tech Help for servicing your wheel bearings? Get my tech publication: TSB4715 Front Wheel Bearing Service for 1977½-1991 GM Full Size SUV's, 1/2 Ton, and 3/4 Ton Trucks with Manual Locking Hubs.

Tech Note 7: Dodge Standard 44 Dimensions
The standard front axle on 1985-1993 Dodge W-250 3/4 ton 4x4 trucks with gasoline engines is a Dana 44 beam type front axle with Gross Axle Weight Rating (GAWR) of 3500 pounds. The end of the wheel hub measures about 3-5/8" in diameter and the spindle thread is 1-5/8". Standard on the diesel W-250 and optional on the gas W-250 was the 4500 pound rated Dana 60 front axle which has a front wheel hub that measures about 4-1/8" at the outer end and a 2" spindle thread.

Tech Note 8: Matching Parts for GM
Matching Parts and Tools for QU40313U Front Spindle Kit:
QU40054 Spindle Mounting Stud 1973-1991
QU30191 New 6 Bolt Wheel Hub for 1977.5-1991 Blazer, Jimmy, 1/2 ton Suburban and truck
QU30194 New 8 Bolt Wheel Hub for 1977.5-1991 3/4 ton Suburban and truck
QU50834 New 8 Bolt Hub and Rotor Assembly for 1977.5-1991 3/4 ton Suburban and truck
TK4715/TK4743 Wheel Bearing Kits with Timken® Bearings
QU50447 Timken® Outer Wheel Bearing Cup
QU50448 Timken® Outer Wheel Bearing
QU50446 Timken® Inner Wheel Bearing Cup
QU50412 Timken® Inner Wheel Bearing
QU50091 Wheel Seal
QK4727 Round, 4 Slot Spindle Nut Kit for vehicles with solid drive gears or manual hubs
QK4770 Round 4 Slot Spindle Nut Kit for vehicles with Automatic Hubs
QU40221 Outer Axle Shaft
QU90018 Protection Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease
QT5500 Wheel Bearing Packer
QT1025 4 Lug Spindle Nut Socket
TSB4715 Front Wheel Bearing Tech Service Bulletin
Chevy & GMC Shop Manuals

Tech Note 9: Matching Parts for Dodge
QU11205U Used 5 Bolt Wheel Hub for 1985-1993 Ramcharger, Trailduster, W150
QU11197U Used 8 Bolt Wheel Hub for 1985-1993 W250
TK4715/TK4743 1980-1984 Wheel Bearing Kits
TK4709D/TK4752D 1985-1993 Wheel Bearing Kits
QU50447 Timken® Outer Wheel Bearing Cup
QU50448 Timken® Outer Wheel Bearing
QU50446 Timken® Inner Wheel Bearing Cup
QU50412 Timken® Inner Wheel Bearing
QU50091 1980-1984 Wheel Seal
QU90001 1985-1993 Wheel Seal
QK4727 Round, 4 Slot Spindle Nut Kit for vehicles with solid drive gears or manual hubs
QU90018 Protection Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease
QT5500 Wheel Bearing Packer
QT1025 4 Lug Spindle Nut Socket
Dodge & Ram Shop Manuals

Applications

Chevy and GMC:
1/2 and 3/4 ton truck plus Blazer, Jimmy, and Suburban: 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987
Blazer, Jimmy, plus 1/2 and 3/4 ton Suburban: 1988, 1989, 1990, 1991

Dodge and Plymouth:
Ramcharger, Trailduster, W100, W150: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993
W-250 with Dana 44 Front Axle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993

Jeep:
Jeep J-Series Cherokee, Wagoneer, and Truck: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991