QU40121U Used Ford Dana 28 IFS Front Axle Inner Spindle Nut w/ Pin

QU40121U Used Ford Dana 28 IFS Front Axle Inner Spindle Nut w/ Pin for 1983-1989 Ranger Pickup and 1984-1989 Bronco II with Model 28 Axle and 23 Spline Manual Locking Hubs. Available while supplies last.

Also See: QU40121 New Inner Spindle Nut with Pin

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Fits
Pin
Spindle Nut Sockets
Applications

Tech Note 1: Fits
QU40121U Spindle Nut fits spindles with thread diameters of 38mm.

Tech Note 2: Pin
The pin that protrudes from the outboard face of QU40121U Inner Spindle Nut is an anti-rotation device that engages with one of the holes in QU40282 Spindle Lock Washer. Installing the lock washer without having the pin engage one of the holes will either break or bend the pin. Improperly installed nuts and washer sets can back off during vehicle operation and possibly cause the hub and wheel assembly to fall off which may lead to severe injury or death.

Tech Note 3: Spindle Nut Sockets
Use with QT1012 or QT1025 Spindle Nut Sockets. The spindle nut tightening procedure and torque specification varies widely depending upon the year and model. Consult a factory shop manual for your vehicle.

Applications
Ford:
Ranger Pickup with Dana 28IFS Front Axle and 23 Spline Manual Locking Hubs: 1983, 1984, 1985, 1986, 1987, 1988, 1989
Bronco II with Dana 28IFS Front Axle and 23 Spline Manual Locking Hubs: 1984, 1985, 1986, 1987, 1988, 1989