Description
TK50084 Torque King® 2nd Design Rear Output Shaft, 32 Spline for Fixed Yoke. OE Spec New Process Rear Output Shaft fits all NP205 transfer cases with 32 spline, fixed yoke, rear output shafts that use a splined plastic speedometer gear. This is the heavy-duty, late model, redesigned shaft with drilled oil feed holes for greater strength. Originally designed for heavy-duty 1989-1993 Dodge trucks with the Cummins Diesel and Getrag G360 5 speed manual transmission. USA Made.
Also available while supply lasts: QU50897U Used Original Design Rear Output Shaft with long oil slots for fixed yoke applications with plastic speedo gear.
Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes:
1st Design
2nd Design
Design Change
Matching Parts
Applications
Tech Note 1: 1st Design
The original NP205 Rear Output Shaft has a tendency to shear under high loads due to the design of the oil feed slots. This weak point was not a big issue with the low power gas engines available when the NP205 was introduced in 1969, but it became a big issue towards the end of the the NP205's production life especially with the high-torque Cummins Diesel engine available in Dodge trucks from 1989 to 1993. Shaft breakage problems led to the TK50084 redesigned shaft with drilled oil feed holes. To see the difference, click on the link above to see our NP205 Rear Output Shaft Comparison Tech Photo.
Tech Note 2: 2nd Design
TK50084 is a direct replacement for any Chevy, Dodge, Ford, GMC, or IHC NP205 Transfer Case with a fixed rear output yoke and a PLASTIC speedometer drive gear. The shaft will physically fit early production NP205 transfer cases with steel speedometer drive gears, HOWEVER, the steel speedometer gear and steel spacer WILL NOT fit the TK50084 shaft! We do not have any concrete information about which plastic drive gears would work with early production driven gears.
Tech Note 3: Exploded Views
Exploded View XV4005 1980-1993 Dodge NP205 Transfer Case
Exploded View XV4006 1969-1974 Dodge NP205 Transfer Case
Exploded View XV4007 1969-1975 IHC NP205 Transfer Case
Exploded View XV4008 1973-1977.5 Ford F250 Remote NP205 Transfer Case
Exploded View XV4009 1973-1979 Ford Direct Mount NP205 Transfer Case
Tech Note 4: Matching Parts
TK10859 Low Gear
QU50185 Set of 16 Low Gear Needle Rollers
QU50359 Low Gear Bearing Spacer
QU10696AM Tanged Inner Low Gear Thrust Washer
QU10316 Shaft Anti-Rotation Pin
QU50275 Set of 15 Rear Output Shaft Needle Rollers
QU50350 Pilot Bearing Thrust Washer
QU50351 Pilot Bearing Lock Ring
TM2000 NP205 Shop Manual
Applications
New Process NP205 Transfer Cases:
with Fixed Rear Output Shafts and Plastic Speedometer Drive Gears
All NP205's except 1980-1991 GM with Slip Yoke Rear Output use a 32 Spline Rear Output. TK50084 will directly replace shafts that are splined for a plastic speedometer drive gear. The list below shows the approximate year ranges for NP205's that had plastic speedo gears:
Chevy and GMC: 1973-1991 (1973-1979 ALL, 1980-1991 with Fixed Rear Output)
Dodge: 1973-1993
Ford: 1973-1979
IHC: 1974-1975
TK50084 will fit the older transfer cases before the years listed above, but steel gear and spacer need to be replaced by plastic gear.
Warranty
Product Reviews
Delivery & Returns
Shipping times are estimated in your cart.
More info can be found at the link below.