TK4752 Dana 44 Front Wheel Bearing and Seal Kit for Dodge and Ford

TK4752 Torque King® Dana 44 Front Wheel Bearing and Seal Kit for Dodge and Ford Front Axles are for all 1977.5-1996 Ford F250 4x4s with Dana 44 front axles and 1985 to 1993 Dodge Ramcharger, Plymouth Trailduster, W150, W250 4x4s with Dana 44 front axles. Do the job right the first time with premium quality parts. Kit includes 4 Timken® Bearings with Bearing Cups, and 2 Wheel Seals.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Kit Components
Spindle Nut Socket
Pack Bearings
Installers
Dodge W-250
Matching Parts
Applications

Tech Note 1: Kit Components
Both TK4751 Kit with Installation Tools and TK4752 Kit without Tools include these parts:
2 QU50447 Timken® Outer Wheel Bearing Cups
2 QU50448 Timken® Outer Wheel Bearings
2 QU50446 Timken® Inner Wheel Bearing Cups
2 QU50412 Timken® Inner Wheel Bearings
2 QU90001 Wheel Seals

Tech Note 2: Spindle Nut Socket
If you need a Spindle Nut Socket, order QT1012 or QT1025.

Tech Note 3: Pack Bearings
Before installing your new bearings, pack them with QU90018 Pyroplex® grease or other quality, disc brake rated, NLGI Grade 2 wheel bearing grease. I recommend you use QT5500 Wheel Bearing Packer to pack the bearings, but however you pack the bearings, your grease has to be clean and it MUST fill all the air spaces under the cage and between the bearing rollers.

Tech Note 4: Installers
Your new wheel bearing cups MUST be fully seated in the hub bores. The Bearing Cup Installers included with TK4709 Master Kit are the best tools to properly install the cups without damaging the wheel hub or bearing cup surfaces. The Master Kit also includes a wheel seal installer that makes it easy to install your new wheel seals to the correct depth. The installer will not damage, ding, or bend the wheel seal and it keeps tension on the seal garter spring so the spring does not jump off the lip (a very common problem with makeshift seal installation methods).

Tech Note 5: Dodge W-250
The standard front axle on 1985-1993 Dodge W-250 3/4 ton 4x4 trucks with gasoline engines is a Dana 44 beam type front axle with Gross Axle Weight Rating (GAWR) of 3500 pounds. The end of the wheel hub measures about 3-5/8" in diameter and the spindle thread is 1-5/8". Standard on the diesel W-250 and optional on the gas W-250 was the 4500 pound rated Dana 60 front axle which has a front wheel hub that measures about 4-1/8" at the outer end and the spindle will have 2" threads.

Tech Note 6: Matching Parts
Matching Parts and Tools for TK4752 Front Wheel Bearing/Seal Kit:
QU40313 Spindle for Dodge
QU11205U Used 5 Bolt Wheel Hub for Ramcharger, Trailduster, W150
QU11197U Used 8 Bolt Wheel Hub for W250
QU50655 Cap O-Ring for Warn Hub
QU50240 Dial O-Ring for Warn Hub
QK4727 Round, 4 Slot Spindle Nut Kit for vehicles with solid drive gears or manual hubs
QK4770 Round 4 Slot Spindle Nut Kit for vehicles with Automatic Hubs
QU90018 Protection Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease
QT5500 Wheel Bearing Packer
QT1025 4 Lug Spindle Nut Socket

Applications

Dodge, Plymouth, and Ram:
Ramcharger, Trailduster, W150: 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993
W250 with Dana 44 Front Axle: 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993

Ford:
F-250 Dana 44 1978-1979
F-250 Low-Boy with Dana 44 Front Axle: 1977-1/2, 1978, 1979
F-250 with 3800 or 3850 pound rated Dana 44IFS Front Axle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996