QK4734 Pair of Spindle Bearings for Dana 30, Dana 44, GM 10 Bolt Front Axles

QK4734 Front Axle Shaft Spindle Bearing Set fits late 1960's to 1990's Dana 30, Dana 44, and GM 10 Bolt front axles, plus 1976-1977 Ford F-250 crew Cab Dana 60 axles. One bearing is pressed into each spindle to support the outer axle shaft. USA Made.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Little Bearing, Big Job
Seals and Thrust Washers
Bearing  Depth
Chevy/GMC Exploded Views
Dodge/Plymouth/Ram Exploded Views
Ford Exploded Views
International Exploded Views
Jeep Exploded Views
Applications

Tech Note 1: Little Bearing, Big Job
These little bearings carry almost all the weight of your heavy axle shafts. The only support point inside the axle housing is the differential itself, there are no bearings or bushings in the axle tubes except on the disconnect side of 1989-1993 Dodge Dana 44 axles with vacuum controlled central axle disconnect systems.

Tech Note 2: Seals and Thrust Washers
Over the years, several seal and thrust washer configurations were used to protect this bearing. For mid 1970's and later, all applications will use either QU40056 Small V-Seal or QU40556 Unitized Seal/Thrust Washer. QK4734 Spindle Bearings must be installed deep enough that the thrust washer will seat against the spindle face. For ALL applications, care must be taken not to seat the bearing too deep as it will bind if pressed beyond the machined bore.

Tech Note 3: Bearing Depth
Early production Dana 30 and Dana 44 open knuckle axles that used these bearings (generally prior to 1975) did not use QU40056 Small Spindle V-Seal between the spindle bearing and axle shaft thrust washer. Spindles from these early axles are not bored deep enough to install both a spindle bearing and a seal. Circa 1975 and later axles do have deeper spindle bearing bores. For these axles, use optional QT1134 Spindle Bearing Installer to seat your new QK4734 Spindle Bearings to the correct depth below the spindle face to permit the installation of QU40056 Small spindle V-Seal

Tech Note 4: Chevy/GMC Exploded Views
Links to our FREE, application specific exploded views for Chevy or GMC 4x4 front axles that use QK4734 Spindle Bearings

Tech Note 5: Dodge/Plymouth/Ram Exploded Views
Links to our FREE, application specific exploded views for Dodge, Plymouth, or Ram 4x4 front axles that use QK4734 Spindle Bearings

Tech Note 6: Ford Exploded Views
Links to our FREE, application specific exploded views for Ford 4x4 front axles that use QK4734 Spindle Bearings

Tech Note 7: International Exploded Views
Links to our FREE, application specific exploded views for IHC 4x4 front axles that use QK4734 Spindle Bearings
Under Construction!

Tech Note 8: Jeep Exploded Views
Links to our FREE, application specific exploded views for Jeep 4x4 front axles that use QK4734 Spindle Bearings

Applications

Solid Axles:
Late 1960's to 1990's Dana 30, Dana 44, and GM 10 Bolt front axles
Ford F-250 crew Cab Dana 60 axles: 1976,1977

IFS Axles:
1980-1996 Ford Bronco and F150 Dana 44IFS Front Axles
1990-1997 Ford Expedition and Ranger Dana 35IFS Front Axles
1994-1997 Ford Ranger Dana 28IFS Front Axles